Shenzhen Aodasen Technology Co. Ltd JY-69C User Manual

 

clock 1.

 

At this point, enter the hour selection for setting the alarm,the hour of the screen will flash at the 

same time.The flashing time is 5S. 

2）

When setting the hour of alarm clock 1,press the previous or next button to add or subtract the hour of 

the clock.The flashing time is 5S. 

3）After hour’s setting of alarm clock 1 is done.Short press C button,enter the minute’s setting of alarm 

clock 1,the minute of the screen will flash at the same time.The flashing time is 5S. 

4）When setting the minute of alarm clock 1,press the previous or next button to add or subtract the 

minute of the clock.The flashing time is 5S. 

 

5）After the minute’s setting of clock 1 is done.Short press C button and enter the setting of alarm 

mode.The alarm mode( USB TF FM BB )can be selected by press the previous or next button.After 

selecting the alarm mode,single press C button again to enter the mode of turning on and off.If you 

select ON to turn on the alarm,OFF to turn off the alarm.single press C button again to enter the single 

and loop alarm mode.ONE is for single alarm for the day.ALL is alarm repeating every day.

 

After the 

setting is completed, press for three seconds after setting (noted:all operations cannot stay for more 

than 5 seconds, and you must reset if the time is exceeded.) 

6 ） Pause the alarm when you press any button during the alarm.After 5 minutes,it will alarm 

again,repeat 3 times.If you don’t need to repeat the alarm,long press C button for 3 seconds to cancle 

the alarm.If you don’t press any button during the alarm,

the 

alarm will continue to ring for 5 minutes,then 

stop for 5 minutes and repeat 3 times. 

 

7）The setting of alarm clock 2 is as same as the alarm clock 1. 

 

Output：6W  3W*2 

Frequency：20-18000HZ （+/-3dB) 

S/N:≥80dB 

Speaker：45mm  

Speaker Impedance：4Ω 

Input： DC 5V