Bogen MR8 Leaflet
Description
Mounting
Accessories for
Ceiling Speaker
Ceiling Speaker
Grille Assemblies
*
Models RE84, MR8, TB8
The RE84 Ceiling Speaker Enclosure is a protective
enclosure for an 8" speaker, designed for recessed
installations, and for use with any of the Bogen ceiling
grilles. One-piece steel construction includes a
mounting ring and a foam insert to reduce metallic
resonance. The RE84 is finished in rust-resistant
primer and is tapered for easy stacking. UL approved.
enclosure for an 8" speaker, designed for recessed
installations, and for use with any of the Bogen ceiling
grilles. One-piece steel construction includes a
mounting ring and a foam insert to reduce metallic
resonance. The RE84 is finished in rust-resistant
primer and is tapered for easy stacking. UL approved.
The MR8 Mounting Ring is a cold-rolled steel unit
which will mount any of the Bogen ceiling grilles, for
installations where the RE84 is not used.
which will mount any of the Bogen ceiling grilles, for
installations where the RE84 is not used.
The TB8 Tile Bridge is a load-bearing T-bar support
designed to sustain the weight of an 8" speaker, grille
and protective enclosure in suspended ceiling con-
struction. Use of the TB8 improves environmental
safety and eliminates unsightly sag in 2'-by-2' and
2'-by-4' acoustic ceiling tiles.
designed to sustain the weight of an 8" speaker, grille
and protective enclosure in suspended ceiling con-
struction. Use of the TB8 improves environmental
safety and eliminates unsightly sag in 2'-by-2' and
2'-by-4' acoustic ceiling tiles.
Specifications subject to change without notice.
© 2008 Bogen Communications, Inc.
54-7777-10B 1108
RE84
MR8
TB8
Features
RE84 - Ceiling Speaker Enclosure The protective
enclosure for the 8" cone-type loudspeakers shall be a
Bogen model RE84, or equivalent, designed for
recessed installations. It shall be constructed of one-
piece heavy-gauge steel, and shall include a speaker
mounting ring. A foam insert shall be permanently
attached to the inner surface, to prevent metallic reso-
nance. Four combination 1/2" – 3/4" conduit knockouts
shall be provided at 90 degree intervals, and the unit
shall be finished in a rust-resistant primer coating. The
dimensions shall be: 12-1/4" dia. x 4-1/2" D.
enclosure for the 8" cone-type loudspeakers shall be a
Bogen model RE84, or equivalent, designed for
recessed installations. It shall be constructed of one-
piece heavy-gauge steel, and shall include a speaker
mounting ring. A foam insert shall be permanently
attached to the inner surface, to prevent metallic reso-
nance. Four combination 1/2" – 3/4" conduit knockouts
shall be provided at 90 degree intervals, and the unit
shall be finished in a rust-resistant primer coating. The
dimensions shall be: 12-1/4" dia. x 4-1/2" D.
MR8 - Mounting Ring The plaster ring shall be a
Bogen model MR8, or equivalent, circular cold-rolled
steel unit that will mount any Bogen ceiling grille.
It shall be finished in a rust-resistant primer coating,
and the dimensions shall be: 12" dia. x 3/4" D.
Bogen model MR8, or equivalent, circular cold-rolled
steel unit that will mount any Bogen ceiling grille.
It shall be finished in a rust-resistant primer coating,
and the dimensions shall be: 12" dia. x 3/4" D.
TB8 - Tile Bridge The load-bearing T-bar support
shall be a Bogen model TB8, or equivalent, capable of
sustaining the weight of an 8" speaker, grille and pro-
tective enclosure in suspended ceiling construction.
It shall be manufactured of steel and shall be finished
with a rust-resistant galvanized coating. The unit shall
measure: 23-3/4" W x 3/4" H x 14-1/2" D.
shall be a Bogen model TB8, or equivalent, capable of
sustaining the weight of an 8" speaker, grille and pro-
tective enclosure in suspended ceiling construction.
It shall be manufactured of steel and shall be finished
with a rust-resistant galvanized coating. The unit shall
measure: 23-3/4" W x 3/4" H x 14-1/2" D.
Architect
and Engineer
Specifications
RE84 - Ceiling Speaker Enclosure
• Protective enclosure for 8" speaker in recessed
• Protective enclosure for 8" speaker in recessed
installations
• One-piece steel construction includes mounting
ring and foam insert to reduce metallic resonance
• Finished in rust-resistant primer
• For use with any Bogen ceiling grille or assembly
• UL approved
• For use with any Bogen ceiling grille or assembly
• UL approved
MR8 - Mounting Ring
• Constructed of cold-rolled steel
• Finished in rust-resistant primer
• For use with any Bogen ceiling grille or assembly
• Constructed of cold-rolled steel
• Finished in rust-resistant primer
• For use with any Bogen ceiling grille or assembly
TB8 - Tile Bridge
• Load-bearing T-support
• Capable of sustaining weight of any Bogen 8"
• Load-bearing T-support
• Capable of sustaining weight of any Bogen 8"
ceiling speaker, grille, and enclosure in suspend-
ed ceiling installations
ed ceiling installations
• Steel construction
• Finished in rust-resistant coating
• Finished in rust-resistant coating
* For speakers mounted to CG8AW, PG8A, PG8U,
PG8W, and SG8W