Bogen V35 Leaflet

• 5 models ranging from 35W to 250W each;

a mixer-only version (VMIX) is also available

• Capable of handling 70V, 25V, 8-ohm, and 4-ohm

speaker loads

• 8 module bays

• Wide selection of advanced plug-in modules

(modules sold separately)

• 4 levels of priority between modules

• 2 module bays capable of handling plug-in signal-

processing output modules

• 11-segment LED output level meter monitors the

output level of the power amplifier with Avg./Peak
meter switch

• Motorized master volume control can be remotely

operated

• Lockable switch permits user to select either

transformer-coupled outputs or a direct low-
impedance output

• 5-position barrier strip, with clamping washers,

provides connections for speaker loads

• Bridging In/Out connector

• External access to priority mute buses

• Bridging jack and Mute terminals join multiple

Power Vector amps and mixers together

• Independent volume control for each of the eight

module bays

• Two-color LED for each channel indicates input

signal or clipping

• Bass and treble control with bypass switch (located

in module bay 6)

• 125 Hz Low Cut switch (located in module bay 6)

• Signal-processing insert jacks allow external

equipment to be inserted between the pre-amp
output and the power amp input

• Pre-EQ, unbalanced, buffered output signal

(“post” all unit controls, but “pre” any external
“Insert” equipment connected)

• Grounded, unswitched AC convenience recepta-

cle with a 500W maximum capacity provided for
external equipment

• 8 module security cover/filler plates included with

amplifier (PVMC)

• Push-button remote volume control panel (Model

RVCP, sold separately)

• Security cover to selectively protect volume,

bass, and treble controls (Model PVSC, sold sep-
arately)

• Rack mountable (with rack mounting kit RPK87,

sold separately)

• 2 rack spaces high (3-1/2")

• Listed to UL Standard 60065 for U.S. and Canada

Specifications subject to change without notice.

© 2003 Bogen Communications, Inc.

54-8013-01E  1201

Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five
models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm)
impedance speaker systems.

Each model includes eight module bays for plug-in input modules and allows up to four levels of priority
between modules. Two module bays are capable of accepting plug-in signal-processing output modules.
Each module is controlled by an independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level.

Each model includes a motorized master volume control that can be controlled using a remote volume
control panel (RVCP, sold separately).