Oracle America Inc ENDCAP User Manual
Page 1 of 6
Installing the mTablet RFID/Imager Module
The following procedure describes how to install the mTablet RFID/Imager Module to MICROS
mTablet.
mTablet.
1. Place the mTablet on table.
2. Gently attach the mTablet RFID/Imager Module as shown in figure1.
3. Find the screw holes at mTablet RFID/Imager Module, as figure 2
4. Lastly, place the screws and tighten it with alien key.
4. Lastly, place the screws and tighten it with alien key.
mTablet
mTablet RFID
/Imager Module
Figure 1
Figure 2