Oracle America Inc RWRFID User Manual
1. Remove the AC power cable from the mStation.
2. Place the mStation face down. Find the 2 screw holes for attach LCD
customer display, which at the edge of unit.
3. Attach the LCD customer display to it and tighten the captive screws as
shown in figure 1.
Figure 1
4. Feed the interface cable to IO port labeled “Customer Display”
5. Snap-in the cable to the clip and rubber footer. And then use cable tie to
fix the cable inside the concave as shown in figure 2.
Figure 2
Tighten the captive screws
mStation
Customer
Display
Rubber
footer
Clip
Cable tie to fix
the cable in
concave