Bright Beginning Electrical Products Co. Ltd. 120FC403222 User Manual
4.1 FCC Note
“This light device has been tested and found to comply with the limits for Consumer RF
Lighting device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
This product may cause interference to radio equipment and should not be installed
near maritime safety communications equipment or other critical navigation or
communication equipment operating between 0.45 – 30MHz.”
* Reorient or relocated the equipment position
* Increase the separation between the equipment and the other electronic equipments
* Connect the equipment into other circuit different from other electronic equipments are
connected
* Consult the dealer or an experienced electronic equipments technician for help
4.2 Caution
Disconnect line voltage before installing or replacing.
Ballast case must be grounded to avoid possible shock hazard
4.3 Ballast Information
4.3.1 BEB/120/40+32/1
Ballast BEB/120/40+32/1
Case
Dimension(mm): 153×40×30
Lamps FC16+12T9(40W+32W)
Max.
Operate
Ambient
Tem.
55℃
Num. of lamps
1+1
Min. Start Ambient Tem.
-18℃
Input Voltage
120Vac 60Hz
Sound Rating
Class A
Max. Input Current
0.82±10% Net
weight
0.35Kg
Max. Input Wattage
58W±10%
Open Circuit Voltage
600V
Min. Starting Voltage
108V
Voltage to Ground
<600V
Normal Factor
>0.5
Enclosed and Potted
Type 1 Outdoor
Class P Type HL
No PCB's
Rapid Start
UL and CUL
Total Harmonic
Distortion <150%
Lamp Operation
In Series
Lamp Current
0.23A
Current Crest Factor
<1.7
Operating Frequency
48kHz