Orion Electric Co Ltd M2A3A User Manual
18
Setting the Video Channel / Setting the language
To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
If the unit does not operate properly,
or No key operation (by the unit
and/or the remote control): Static
electricity, etc., may affect the player's
operation. Disconnect the AC power
cord once, then connect it again.
If there is no pressing of any buttons
for more than 60 seconds, then the
VCR switch back to TV-operation
automatically.
The VCR section has its own menu
and also DVD section has its own
menu (see page
or No key operation (by the unit
and/or the remote control): Static
electricity, etc., may affect the player's
operation. Disconnect the AC power
cord once, then connect it again.
If there is no pressing of any buttons
for more than 60 seconds, then the
VCR switch back to TV-operation
automatically.
The VCR section has its own menu
and also DVD section has its own
menu (see page
26
).
NOTE:
•
•
•
•
1
To turn on the VCR/DVD, at first slide TV/VCR/DVD switch to
VCR/DVD. Then press POWER to turn on the VCR/DVD.
VCR/DVD. Then press POWER to turn on the VCR/DVD.
2
Press VCR to select the VCR mode. The VCR indicator will
light.
light.
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
French and Spanish) for the on-screen displays.
When a TV is connected with the 75 ohm coaxial cable only.
3
Set the 3/4 Channel selector switch (Rear of the VCR) to CH 3
or 4.
or 4.
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 3.
channel selected in step 3.
5
Press TV/VCR to select the VCR position.
The TV/VCR indicator will light.
The TV/VCR indicator will light.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
Setting the Video Channel
Setting the language
<
/ / / /MENU
>
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
LANGUAGE/IDIOMA/LANGUE
<
/ / / /MENU
>
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
LANGUAGE/IDIOMA/LANGUE
3
Press SETUP MENU,
If you use the unit for the first time
and press SETUP MENU, instead
of the main menu screen on the
right the SYSTEM SET UP menu
screen in step 2 may appear.
If you use the unit for the first time
and press SETUP MENU, instead
of the main menu screen on the
right the SYSTEM SET UP menu
screen in step 2 may appear.
Press
or
to select the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
1
2
Press
or
to select the
“LANGUAGE” option, then press
ENTER.
ENTER.
4
Press SETUP MENU until the MENU screen is cleared.
TV/VCR CH +
TV
VCR
DVD
POWER
DVD MENU
MARKER
RETURN
OPEN/
CLOSE
DISPLAY
A.TRK
C.RESET
ZERO RETURN
SUB TITLE
ANGLE
SEARCH
MODE
SP/EP
PLAY
MODE
ZOOM
TITLE
REPEAT
A-B
TV
POWER
INPUT
TV VOL
0
TIMER
TV/VCR
REW
PLAY
FF
REC
STOP
PAUSE
SKIP
/INDEX
SKIP
/INDEX
TV/VCR CH —
SET
SET
ENTER/
SELECT
SET UP
MENU
CANCEL
OSD
A.MONITOR
SLOW
SKIP
SEARCH
<
/ / / /MENU
>
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
LANGUAGE/IDIOMA/LANGUE