ShenZhen SolidRF Communications Co. Ltd SR25502001 User Manual
1. Location of the nearest cell tower – cell towers are situated to provide broad coverage;
however, there are many areas in which signal strength may be reduced by
topographic features or by local government restrictions on the height or placement of
the towers themselves. Rural areas generally have fewer cell towers than urban
regions.
2. Natural and man-made obstructions – signal strength can also be negatively affected
by trees, hills, buildings, weather, and other obstructions. You may be relatively close
to a cell tower but still unable to make a call. This often occurs in homes and other
buildings in which stucco, concrete or metal walls may block the signal.
Easily solve these problems by installing a SolidRF booster.
Overview of installation
Overview of installation
Overview of installation
Overview of installation
1. Select installation location away from direct sunlight, heat, water and proper
ventilation. Do NOT install in a sealed enclosure.
2. Before powering up the Signal Booster, verify that both the Outside Antenna and the
Inside Antenna are connected and check that all connections are tight. Note: Be
careful when plugging the connectors in so as not to bend the center pins on the
connectors.
Warning:
Warning:
Warning:
Warning: Connecting the Signal Booster directly to a cell phone with use of an adapter
Connecting the Signal Booster directly to a cell phone with use of an adapter
Connecting the Signal Booster directly to a cell phone with use of an adapter
Connecting the Signal Booster directly to a cell phone with use of an adapter
will damage the cell phone and/or the Signal Boos
will damage the cell phone and/or the Signal Boos
will damage the cell phone and/or the Signal Boos
will damage the cell phone and/or the Signal Booster.
ter.
ter.
ter.