NEC Corporation of America NII5120 User Manual
1
Making a Voice/Videophone
Call
Call
1
Enter the phone number of the other
party
party
The “Enter phone number
screen” appears.
Always start by entering the
area code, even for calls
within the same area.
You can enter up to 80 digits
for the phone number.
However, only the last 26
digits are displayed.
screen” appears.
Always start by entering the
area code, even for calls
within the same area.
You can enter up to 80 digits
for the phone number.
However, only the last 26
digits are displayed.
<When you enter a wrong number>
■ To insert a number
Press
Press
v to move the cursor to the number to
the left of the position where you want to insert
the number, then enter the number.
the number, then enter the number.
■ To delete a number
Press
Press
v to move the cursor to the number you
want to delete, then press
t.
Hold down
t for 1 second or longer to delete
all the numbers to the left of the cursor and the
number in the cursor position.
number in the cursor position.
■ To re-enter the number
Move the cursor to the beginning or end of the
number and hold down
Move the cursor to the beginning or end of the
number and hold down
t for 1 second or
longer to return to the standby screen.
2
r (voice call) /o (V. phone)
* As N-06B is not equipped with the front camera,
during a videophone call, you can send only the
substitute image (Chara-den) or image from the
rear camera to the other party.
You can change the substitute image (Chara-
den) to other data such as an image of My picture
substitute image (Chara-den) or image from the
rear camera to the other party.
You can change the substitute image (Chara-
den) to other data such as an image of My picture
in “Select image”.
→P.67
<Videophone>
■ To change the substitute image (Chara-
den)
X
F
u (FUNC)
X
“Select image”
X
“Chara-den”
X
Select Chara-den
Enter phone number
Function menu
¨P.48
<Voice call>
The “In-call screen”
appears.
“
appears.
“
” flashes while dialing
and lights up during the
call.
call.
■ If you hear the busy
tone
The line is busy. Call again
after a while.
after a while.
■ If you hear a message saying that the
other party cannot be reached
The other party’s mobile phone is not turned
on or is out of signal range. Call again after a
while.
on or is out of signal range. Call again after a
while.
■ If you hear a message requesting your
caller ID
Call again with caller ID notification enabled.
→PP.44, 56
<Videophone>
The “Videophone in-call
screen” appears.
“
screen” appears.
“
” flashes while dialing
a videophone call and
lights up during the call.
lights up during the call.
■ If a videophone call is
not connected
→P.2
■ To switch between
substitute image and
camera image
camera image
X
D
d (Change)
Each time you press
D
d (Change), the
substitute image and camera image switches.
■ To switch the main screen
X
D
d (1 second or longer)
“Change main disp.”
→P.48
■ To enlarge the camera image to be sent
X
Adjust the zoom using
G
v
Zoom
→P.203
■ To mute the voice to send
X
S
a (マナー ) (1 second or longer)
The “
” icon is displayed.
To cancel muting, press
S
a (マナー ) for 1
second or longer again.
In-call
Videophone in-call
Function menu
¨P.48