RadioShack Corporation 2101903 User Manual
11
Using Panic
When emergency occurs, user can set the radio generate alarm sound for safety.
1. To activate alarm sound, press and hold PANIC key (about 0.5 seconds). Release PANIC key when warning
1. To activate alarm sound, press and hold PANIC key (about 0.5 seconds). Release PANIC key when warning
tone sound and vibrate.
Note:
Note:
•
The alarm sound can be activated even if the radio is Power Off (rotary switch Off) or battery
charging or battery low.
charging or battery low.
•
Within warning sound and vibration period, press PANIC key once to stop the function.
2. After warning tone sound and vibrate (about 2 seconds), the radio will generate alarm sound.
3. To stop alarm sound, press and hold PANIC key (about 2 seconds) until alarm stop and “StOP” shows on LCD.
Using the Swivel Belt Clip
To attach the belt clip, insert the clip into the socket at the back of the radio until it clicks. To remove the belt clip,
press the button at the tip of the clip and pull out the clip.
press the button at the tip of the clip and pull out the clip.
Using an Optional Wrist Strap
You can attach an optional wrist strap (not supplied) to the radio. Slide the wrist strap’s small loop under the bar on
the tip of the radio. You might need to use a small screwdriver or straightened paper clip to do this. Then pull the
strap’s large loop through the small loop.
the tip of the radio. You might need to use a small screwdriver or straightened paper clip to do this. Then pull the
strap’s large loop through the small loop.
CARE
Keep the radio dry; if it gets wet, wipe it dry immediately. Use and store the radio only in normal temperature
environments. Handle the radio carefully; do not drop it. Keep the radio away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.
Modifying or tampering with the radio’s internal components can cause a malfunction and might invalidate its
warranty and void your FCC authorization to operate it. If your radio is not performing as it should, take it to your
local RadioShack store for assistance.
environments. Handle the radio carefully; do not drop it. Keep the radio away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.
Modifying or tampering with the radio’s internal components can cause a malfunction and might invalidate its
warranty and void your FCC authorization to operate it. If your radio is not performing as it should, take it to your
local RadioShack store for assistance.
FCC Information
Important: Do not open your radio to make any internal adjustments. Your radio is set up to transmit a regulated
signal on one of 22 assigned frequencies. It is illegal to alter or adjust the settings inside the radio to exceed those
limitations. Any adjustments to your radio must be made by a qualified technician using the proper test equipment.
To be safe:
signal on one of 22 assigned frequencies. It is illegal to alter or adjust the settings inside the radio to exceed those
limitations. Any adjustments to your radio must be made by a qualified technician using the proper test equipment.
To be safe:
•
Never open your radio’s case.
•
Never change or replace anything in your radio except the batteries.
•
Your radio might cause TV or radio interference even when it is operating properly. To determine whether your
radio is causing the interference, turn it off. If the interference goes away, your radio is causing it. Try to
eliminate the interference by:
radio is causing the interference, turn it off. If the interference goes away, your radio is causing it. Try to
eliminate the interference by:
•
Moving your radio away from the receiver.
•
Calling your local Radioshack store for help.
•
If you cannot eliminate the interference, the FCC requires that you stop using the radio.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.