RadioShack Corporation 4300124C User Manual
4300124
User’s Guide
2
3
4
5
6
2 Set the Channel and Sub Tone
To change channel and sub tone
settings, use a pointed object
to set the SUB TONE and CH
switches inside the battery
compartment.
Your intercoms have four channels
to set the radio frequencies used to
communicate with each other. They
also have eight sub tone settings to
help eliminate interference.
Your intercoms must be set to the
same channel and sub tone for
them to communicate with each
other.
settings, use a pointed object
to set the SUB TONE and CH
switches inside the battery
compartment.
Your intercoms have four channels
to set the radio frequencies used to
communicate with each other. They
also have eight sub tone settings to
help eliminate interference.
Your intercoms must be set to the
same channel and sub tone for
them to communicate with each
other.
1. Set each intercom to channel 1, 2, 3, or 4 as shown.
2. Set each intercom to sub tone 1–8 as shown.
2. Set each intercom to sub tone 1–8 as shown.
n
Note:
• If you want all the intercoms
to communicate with each
other, set them to the same
channel and sub tone.
Thank you for purchasing your Voice-Activated Wireless
Intercoms from RadioShack. Please read this user’s guide
before installing, setting up, and using your new intercoms.
Intercoms from RadioShack. Please read this user’s guide
before installing, setting up, and using your new intercoms.
Package Contents
• Wireless Intercom (2)
• AC Adapter (2)
• User’s Guide
• AC Adapter (2)
• User’s Guide
Features
• Selectable VOX mode for hands-free communication.
• Lockable talk button turns an intercom into a baby
• Lockable talk button turns an intercom into a baby
monitor.
• Expandable by purchasing additional intercoms.
• Can transmit up to 200 feet line of sight.
• Can transmit up to 200 feet line of sight.
1
Power Your Intercoms (two options)
AC power:
Using the supplied AC
adapter, connect the
intercom’s DC 9V jack to a
wall outlet.
Battery power:
Using the supplied AC
adapter, connect the
intercom’s DC 9V jack to a
wall outlet.
Battery power:
1. Slide to open the battery
compartment cover.
2. Set the RECHARGE
ON/OFF switch in the
compartment to ON for
rechargeable batteries or
OFF for alkaline batteries.
compartment to ON for
rechargeable batteries or
OFF for alkaline batteries.
If you use rechargeable
batteries, the intercom will
automatically recharge them
whenever the AC adapter
is plugged in and the
RECHARGE switch is set to
ON.
automatically recharge them
whenever the AC adapter
is plugged in and the
RECHARGE switch is set to
ON.
3. Insert four AA batteries
(not included) matching
the polarity symbols
(+ and –) marked
inside the battery
compartment.
the polarity symbols
(+ and –) marked
inside the battery
compartment.
w
Warning: Never install
alkaline batteries with the RECHARGE switch set to ON.
Alkaline batteries can get hot or explode if you try to
recharge them.
Battery Notes:
Battery Notes:
• We recommend AA 1.2V/2500mAh NiMH
rechargeable batteries, available from RadioShack.
• Dispose of batteries promptly and properly. Do not
burn or bury them.
• Use only fresh batteries of the required size and type.
• Do not mix old and new batteries, different types
• Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
• If you do not plan to use the intercoms for a long
time, remove the batteries. Batteries can leak
chemicals that can damage electronic parts.
• If you want one intercom to communicate only with
one other intercom, set only those two intercoms to
the same channel and sub tone.
• If you receive occasional interference falsely
triggering your intercom, you can set each intercom
to a different sub tone. However, if there is frequent
interference that affects the conversation or audio
quality, set your intercoms to a different channel.
3
Use Your Intercoms
To turn on an intercom, rotate VOLUME to the maximum
volume direction until it clicks. Then adjust VOLUME to a
comfortable listening level.
Call another intercom:
volume direction until it clicks. Then adjust VOLUME to a
comfortable listening level.
Call another intercom:
1. Press CALL once. The TRANSMIT indicator lights.
Each intercom that is turned on and set to the same
channel and sub tone beeps for about three seconds.
channel and sub tone beeps for about three seconds.
2. Press and hold TALK and speak in a normal voice
after you hear the beep. When you finish speaking,
release TALK and listen for the response.
release TALK and listen for the response.
Monitor an intercom:
You can set any intercom so it continuously transmits
sounds from the area where it is located to another
intercom. You can only monitor one intercom at a time.
You can set any intercom so it continuously transmits
sounds from the area where it is located to another
intercom. You can only monitor one intercom at a time.
1. Press LOCK on the intercom in the area you want to
monitor. The TRANSMIT indicator flashes.
2. When you finish monitoring, release the lock by
pressing TALK on the intercom in the area you are
monitoring. TRANSMIT turns off.
monitoring. TRANSMIT turns off.
Sub tone
Channel
Voice-Activated
Wireless Intercoms
LOCK
Press to
Press to
monitor
continuously.
CALL
Press to sound a tone
Press to sound a tone
(or call) on another
intercom for about
three seconds.
VOX
• Press for
• Press for
hands-free
communication.
• Press to set
the sensitivity
level from low,
medium, to high.
VOLUME (On/Off)
RECEIVE BUSY Indicator
• Lights when you receive
• Lights when you receive
a voice message or
when you monitor a
locked intercom.
• Flashes when the
selected “frequency”
channel is in use.
TALK
Press and hold
Press and hold
and speak into
the microphone;
release to listen.
VOX Level Indicator
Microphone
CH
(Channel)
SUB TONE
RECHARGE ON/OFF
4300124C_UG_EN_032713.indd 1-6
3/27/2013 5:46:06 PM