Avaya Canada Corporation NTHV45AA User Manual
APPENDIX B – HANDHELD OPERATION
1. Press <enter> to start handheld.
2. Handheld displays “enter address”
3. Enter address and press <enter>.
4. If ODU responds, asterisk goes on and message “link available” displays.
5. If ODU does not respond, message “no response. <enter> again.” Asterisk is off. The <enter>
2. Handheld displays “enter address”
3. Enter address and press <enter>.
4. If ODU responds, asterisk goes on and message “link available” displays.
5. If ODU does not respond, message “no response. <enter> again.” Asterisk is off. The <enter>
button can be pressed again without going back to entering the address. This allows the user
to move around until a good link is established.
to move around until a good link is established.
6. If link is available, pressing <menu> gets the “status” menu. Up/down arrows allow scrolling
from “status” to “control”, etc.
7. Pressing <enter> will bring up the first data item within the sub-menus. Up/down arrows allow
item scrolling.
8. At each sub-menu item, pressing <enter> will interrogate ODU for a new data item update. If
data was not successfully received, the asterisk will extinguish. Asterisk will go on if data is
received. Asterisk should be constant.
received. Asterisk should be constant.
9. Data will not be automatically updated. New data is received only after each press of the
<enter> button. This includes RSSI and BER.