Motorola Solutions Inc. 89FC4829 User Manual

MTR2000 MOTOTRBO Digital Upgrade: Unpacking

9-3

9.2.1.3  Analog to Digital Migration Path – Removal and Replacement

1. Remove the MTR2000 station front bezel from its chassis locking clip by carefully pulling the 

bezel forward (Refer to Figure 9-1). 

2. Disconnect the Exciter-to-PA Coaxial Cable and Rx Input Cable (Refer to Figure 9-2). By 

disconnecting the cables, the Exciter Module, Receiver Module, Station Control Module 
(SCM) are accessible.

3. Remove the two screws securing the Transceiver (SCM, Exciter, and Receiver modules) to 

the bottom plate. Pull forward on the cast knobs, carefully slide the assembly out of the 
station (Refer to Figure 9-3) and place it aside.

Cast knob

Chassis locking clip

Applicant: Motorola

Equipment Type: ABZ89FC4829

Exhibit D1-4