Motorola Solutions Inc. 89FT7623 User Manual

Page of 44
Release 10.5 
 
Release Notes and User Guide Supplement 
 
 
 
 
 
FCC Draft, November 2010
 
 
Page
 
11 
 
4  Features 
Release 10.5 adds the features listed in 
Table 1
Table 1: Release 10.5 Features 
Regions 
Affected 
Products 
Affected 
Feature 
Description 
See for 
Details 
US 
All 5.4-GHz 
 
5.4-GHz PMP 100 
(FSK) 
5.4-GHz PTP 100 
(FSK) 
5.4-GHz PMP 430 
(OFDM) 
5.4-GHz PMP 400 
(OFDM) 
5.4-GHz PTP 200 
(OFDM)
 
Operation to avoid 
interference with 
Terminal Doppler 
Weather Radar 
(TDWR) 
To avoid interference with TDWR (47 
locations, near major airports), 5.4-GHz 
US radios must 
◦ 
be professionally installed 
◦ 
have a transmit frequency set on 
the AP/BHM at least 30 MHz 
(center-to-center) from any TDWR 
within 35 km (21.75 mi) of the 
AP/BHM or any of its SMs/BHS. 
http://www.spectrumbridge.com/udia/se
arch.aspx
 supports the necessary map 
analysis and includes a database for 
registering the location of these radios 
to expedite interference resolution. 
Section 4.1 
US 
US 5.4-GHz PMP 
430 (OFDM) 
US FCC Certification 
of new product  
US 5.4-GHz PMP 430 APs and SMs 
are now approved for sale in the US. 
As certified, the US 5.4-GHz PMP 430 
AP is limited to operate at 
◦ 
no higher than 85% Data 
Downlink %
 
◦ 
10-MHz and 20-MHz channel 
sizes, but not 5-MHz
 
Lens and reflector were not included in 
the certification. 
Section 7.6, 
Table 10 
Section 
10.2.1, 
Table 11 
 
 
 
US 
US P11 Hardware 
Series 5.4-GHz 
PMP 100 (FSK) 
US P11 Hardware 
Series 5.4-GHz 
PTP 100 (FSK) 
US FCC Certfication 
of new hardware 
series 
US P11 5.4-GHz PMP 100 APs and 
SMs and PTP 100 BHs are now 
approved for sale in the US. 
As certified, the US P11 PMP 100 AP 
and PTP 100 BHM is limited to operate 
at 
◦ 
no higher than 75% Data 
Downlink %
 
(Older hardware series are not limited 
by Release 10.5.)
 
Section 7.5, 
Table 8, 
Table 9 
Section 
10.2.1, 
Table 11 
Canada 
5.4-GHz PMP 430 
(OFDM) 
IC Certification of 
new product  
5.4-GHz PMP 430 APs and SMs are 
now approved for sale in Canada. 
As certified, the AP is limited to 
◦ 
10-MHz and 20-MHz channel 
sizes, but not 5-MHz 
For compliant operation, the Region 
Code 
must be set to Canada by the 
professional installer. 
Section 
10.2.2 and 
Table 11