Panasonic Corporation of North America ST-C700 User Manual

(ENG)

∫ Random repeat playback

Press [RND].

Each time you press the button:

∫ Repeat playback

Press [

`].

Each time you press the button:

≥ You cannot use random repeat playback in combination with other 

playback modes.

≥ You can use repeat playback in combination with program 

playback.

This function allows you to program up to 24 tracks.

Preparation
≥ It is not possible to program tracks by moving folders. 

Move all the tracks you want to program to a single folder 
in advance.

Press [PGM] in the stop mode.

≥ “Program Mode” screen will be displayed.

Press [OK] to display the programming 
screen.

Press [3, 4] to select the desired track.

Press [OK].

≥ Do steps 3 through 4 again to program other tracks.

Press [1/;] to start playback.

≥ To return to the “Program Mode” screen, press [∫].

Operations on the remote control

≥ Programmed content is maintained as long as the input source is 

set to “USB”.

≥ The program memory will be cleared:

– When the USB device is disconnected.
– When the unit is turned to standby or off mode.

≥ You can use program playback in combination with repeat 

playback.

All tracks in a folder are repeated 
randomly.

≥ “RND 

`” is displayed.

Turns off random repeat mode.

Only plays the selected track.

≥ “1 

`” is displayed.

All tracks in a folder are repeated.

≥ “

`” is displayed.

Turns off repeat mode.

Program playback

Press [∫].

≥ Programmed content is maintained.

Press [2, 1] in the stop mode.

≥ To return to the “Program Mode” screen, 

press [RETURN].

Do steps 3 through 4 in the stop mode.

Press [CLEAR] in the stop mode.

≥ It is not possible to select and clear the 

desired programmed track.

1 Press [PGM] in the stop mode.

≥ “Program Clear” is shown.

2 Press [

3, 4] to select “Yes” and 

then press [OK].

≥ The program memory will be cleared.

ST-C700-SQT0495_PP_mst.book  16 ページ  ２０１４年１１月２１日　金曜日　午後７時５５分