Panasonic Corporation of North America 96NKX-HNK101 User Manual
Installation
To mount the keypad flat against the
wall, use the mounting bracket.
Note:
R Mount the keypad on the stable
wall, use the mounting bracket.
Note:
R Mount the keypad on the stable
location where the keypad can be
adequately supported when
mounting.
adequately supported when
mounting.
R Do not mount keypad on a soft
material. It may fall down, break or
cause injury.
cause injury.
R Do not mount the keypad on the
following places: gypsum board,
ALC (autoclaved lightweight cellular
concrete), concrete block, plywood
less than 25.4 mm (1 inch) thick, etc.
ALC (autoclaved lightweight cellular
concrete), concrete block, plywood
less than 25.4 mm (1 inch) thick, etc.
R Use only the supplied Panasonic AC
adaptor PNLV226KZ.
1
Remove the mounting bracket by
pressing the bracket (A) and
sliding it down (B).
pressing the bracket (A) and
sliding it down (B).
A
B
2
Attach the bracket to the wall
securely using the screws (
securely using the screws (
1
)
R Place the bracket with “UP”
mark facing upwards.
R
2
60 mm (2 3/8 inches)
2
1
1
3
Attach the keypad to the bracket.
R Insert the grooves on the
R Insert the grooves on the
keypad to the 4 tabs on the
bracket, and then push down
the keypad.
bracket, and then push down
the keypad.
4
Connect the AC adaptor plug to
the unit until you hear a click (A)
the unit until you hear a click (A)
5
Connect the AC adaptor to the
power outlet (B).
power outlet (B).
2
1
10
For assistance, please visit www.panasonic.com/support
Setup