Panasonic Corporation of North America 96NKX-HNK101 User Manual
Part names and
functions
A
B
C
E
F
D
M
N
Used when registering the keypad
to the hub.
Volume
Used to adjust the volume of the
sounds emitted by the keypad.
Speaker
LED indicator
Touchpanel
DC jack
to the hub.
Volume
Used to adjust the volume of the
sounds emitted by the keypad.
Speaker
LED indicator
Touchpanel
DC jack
LED indicator
You can use the LED indicator to
confirm the keypad’s status.
confirm the keypad’s status.
Indicator
Status
Off
Normal operation or no
power.
power.
Red,
blinking
slowly
blinking
slowly
Keypad is not
registered to a hub.
registered to a hub.
Indicator
Status
Red,
blinking
blinking
Keypad is out of range
of the hub.
of the hub.
Red,
blinking
quickly
blinking
quickly
Alarm system was
triggered.
triggered.
Green,
blinking
blinking
Registration mode
(You pressed and held
M
(You pressed and held
M
N)
Touchpanel
The buttons on the touchpanel allow
you to confirm and change the
system’s current alarm mode.
By default, the button corresponding to
the current alarm mode is lit during
normal operation and no other buttons
are lit. When you tap the touchpanel,
the buttons for all the alarm modes light
for 10 seconds to allow you to control
the keypad, then dim again.
you to confirm and change the
system’s current alarm mode.
By default, the button corresponding to
the current alarm mode is lit during
normal operation and no other buttons
are lit. When you tap the touchpanel,
the buttons for all the alarm modes light
for 10 seconds to allow you to control
the keypad, then dim again.
Button
Status
None
displayed
displayed
No power, or buttons
are turned off
are turned off
, lit
Normal operation,
[Arm: At Home] mode
is selected.
[Arm: At Home] mode
is selected.
, lit
Normal operation,
[Arm: Away] mode is
selected.
[Arm: Away] mode is
selected.
, lit
Normal operation,
[Disarm] mode is
selected.
[Disarm] mode is
selected.
,
blinking
Alarm system was
triggered.
triggered.
For assistance, please visit www.panasonic.com/support
7
Setup