Panasonic Corporation of North America 9TAWV-TW37003 User Manual

Page of 4
WV-TW37003P
POWER
WIRELESS
Bluetooth
Bluetooth
PAIRFD
CLEAR
ON
OFF
ON
ANT
OFF
RESET
Operating Instructions
Common Trigger Box
Model No.
 
WV-TW37003
Preface
• The Common Trigger Box can be installed
in the car. By connecting with Pairing Dock
(option: WV-TW37004), pairing between the
BWC and Common Trigger Box is enabled,
and the BWC can be charged.
• By connecting the Common Trigger Box
and BWC via Bluetooth
®
 communication,
the recording of BWC can be triggered by
external input. Also, the BWC’s operating
information can be informed to the external
devices.
• The Common Trigger Box can be connected
with the existing model SA366 via Wireless
LAN communication.
The model number and serial number of this 
product may be found on the surface of the 
unit.
You should note the model number and serial 
number of this unit in the space provided and 
retain this book as a permanent record of your 
purchase to aid identification in the event of 
theft.
 Model 
No. 
 Serial 
No.
For U.S.A
WARNING:
• The installation shall be carried out in accor-
dance with all applicable installation rules.
• The connections should comply with local
electrical code.
• To prevent fire or electric shock hazard, do
not expose this apparatus to rain or mois-
ture.
• The apparatus should not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, should be
placed on the apparatus.
CAUTION:
• Changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user’s authority to
operate the equipment.
• Power source
To reduce the risk of fire or electric shock and annoying interference, use the recommended
accessory Panasonic MK 3 Lind Distribution Box & Cables only.
Mfr. Part#: ARB-PAPDC2462-3951
• Antenna requirements
Common Trigger Box (WV-TW37003) must be used with following antenna.
ANTENNA PLUS External 2.4 GHz and 5 GHz Wi-Fi antenna: AP-W-Q-S2-RP-BL or ANTENNA
PLUS External 2.4 GHz and 5 GHz Wi-Fi antenna: AP-W-M-S2-RP-WH.
Note:
The 20 cm {7-7/8 inches} minimum separation must be maintained between users and the 
antenna. It is desirable that the antenna is located at least 1 m {40 inches} away from other Wi-Fi 
antennas to avoid the interference.
• Before attempting to connect or install this
product, please read these instructions care-
fully and save this manual for future use.
• The model number is abbreviated in some
descriptions in this manual.
• For information about the installation about
this product, refer to the installation guide
provided by your contact dealer.