Panasonic Corporation of North America TXANP07VKA1 User Manual

Page of 2
Panasonic
                                    Systems Business Group 
Projector Small Business Unit
       
                                                                             
Engineering Department 
Matsushita Electric Industrial Co., LTD 
2-15 Matsuba-Cho, Kadomashi-Shi, Osaka, 571-8503, 
JAPAN
 
Panasonic AVC Company                                             
(TEL)+81-6-6905-4369  (FAX)+81-6-6905-4376
 
 
                                                         
 E-Mail : kakimoto.yasu@jp.panasonc.com 
                                                                                                                         
Installation manual 
 
 
WLAN Unit, model: 
TXANP07VKA1 (FCC ID: ACJTXANP07VKA1)
 is installed in the LCD projector of Matsushita 
Electric Industrial Co., Ltd as shown on the next page. 
With installation of 
TXANP07VKA1 
in LCD projector of Matsushita Electric Industrial Co., Ltd, the following remarks 
are to be considered:   
 
1. 
TXANP07VKA1 
is designated its own FCC ID Number; therefore, the FCC ID Number of 
TXANP07VKA1 
should be appeared on the label on the exterior of LCD projector of Matsushita Electric Industrial Co., Ltd 
unless it is visible.    Such label on the exterior should include a statement, “Contains FCC ID: Contains FCC 
ID: 
ACJTXANP07VKA1
” or similar description. 
 
2. 
TXANP07VKA1
 is in compliance with the requirements of sub-sections 15.203, 15.205, 15.207, and 15.247 of 
FCC Rules Part 15.   
TXANP07VKA1 
is to be installed in accordance with their requirements. 
 
3.  User Manual of LCD projector, in which 
TXANP07VKA1 
is installed, will include the required warning 
statements with regard to co-location of any other transmitter/antenna and RF Exposure as shown below: 
 
                   
 
 
 
TXANP07VKA1 
is in compliance with the requirements of the sub-section 2.1091.    When 
TXANP07VKA1
is installed in 
the LCD projector of Matsushita Electric Industrial Co., Ltd, installers must ensure that the public is not exposed to 
radio frequency energy levels in excess of FCC guidelines in accordance with FCC Rules Part 15.