Napco Security Systems Inc PX4041 User Manual
13
Verifying Basic Keypad User Codes
Test User Code Entered in Getting Started for User 12.
Enter
9 8 7
VALID CODE - The Green LED will flash momentarily and the sounder will beep a few times after a valid code is entered.
INVALID CODE - The RED LED will flash several times and the sounder will beep several times after an invalid code is entered.
Use Function 2 to re-program the code.
INVALID CODE - The RED LED will flash several times and the sounder will beep several times after an invalid code is entered.
Use Function 2 to re-program the code.
Verifying Prox Card and Keyfob Access
Test Prox Card programmed for User 14 in Getting Started.
Present the Programmed Card to the PDL3000 lock
VALID CARD - The Green LED will flash momentarily and the sounder will beep a few times after a valid card or keyfob has
been presented to the PDL3000 Lock.
INVALID CARD - The RED LED will flash several times and the sounder will beep several times after an invalid card or keyfob
has been presented to the PDL3000 Lock. Use Function 2 to re-program the code.
been presented to the PDL3000 Lock.
INVALID CARD - The RED LED will flash several times and the sounder will beep several times after an invalid card or keyfob
has been presented to the PDL3000 Lock. Use Function 2 to re-program the code.
Verifying High Security Access (ProxCard + User Code)
Test Prox Card programmed for High Security Access in Getting Started for for User 15. A ProxCard and User Code are
required for access.
required for access.
1. Enter
7 4 5 2
,
The
sounder will beep slowly for up to 10 seconds.
2. Present the Card programmed in Getting Started to the PDL3000 Lock.
User may enter code or present card in either order to open the lock. The sounder will beep for up to 10 seconds,
waiting for the User to enter code/present card.
waiting for the User to enter code/present card.
Note: Do not present the Prox Card and enter the User Code simultaneously.