Napco Security Systems Inc PX4041 User Manual

20

; 4 3           ; 

[ _  _ ]

 

:

 

    

(seconds)

; 4 4           ; 

[ _  _ ]

 

:

 

    

(seconds)

• 

Number of seconds to Speed Up/Slow Down clock each day must be 0-55 seconds.

Always consider the current setting when using this function.  (Use of this function is not
cumulative.)  For example, if the clock needs to be sped up 10 seconds per day and the
current setting is 10, program 20 seconds using Function 43.

Example 1: Clock is losing 13 seconds every day, enter:

; 4 3       ; 1 3 :.
This example assumes that the clock adjust setting was at the factory default of zero.
Function 57 can be used to print the current clock adjust setting.

Example 2: Clock is gaining 13 seconds every day, enter:

; 4 4       ; 1 3 :.
This example assumes that the clock adjust setting was at the factory default of zero.
Function 57 can be used to print the current clock adjust setting.

Example 3: To set the clock adjust setting back to the factory default of zero, enter

:

; 4 3 :  or ; 4 4 :

 4

; 4 5 :

; 4 6 :

; 4 7      ; 

[ _ _ _ ] 

:

(XXX Hours)

• 

Allows passage through the door without the need for a code using Function 45.   Re-
Lock using Function 46.

• 

Programmed Schedules will

      override the state of the lock using Functions 45 and 46.  If it

is required that programmed schedules do not

      override passage mode, Enable/Disable

 2

• 

Hours must be between 1 - 999.

Allows passage through the door without the need for a code for the programmed amount
of time.

 2