General Research of Electronics Inc 0602902 User Manual
Advanced Features
MicroSD Card
Your PSR-800 ships with a 2 GB MicroSD Card already
formatted, installed and ready for use.
formatted, installed and ready for use.
Connecting the PSR-800 to a computer with the supplied USB
cable allows you to access the card with the PSR-800 PC
Application and update the Library, edit the PSR-800ʼs
configuration and stored objects, optimize the card, and reformat
the card if necessary. You can also purchase additional cards,
format them for use with the PSR-800, then use them to store
different configurations or backups.
cable allows you to access the card with the PSR-800 PC
Application and update the Library, edit the PSR-800ʼs
configuration and stored objects, optimize the card, and reformat
the card if necessary. You can also purchase additional cards,
format them for use with the PSR-800, then use them to store
different configurations or backups.
Computer access to the MicroSD card over the USB cable is
only enabled when the radio is connected to the PC and
powered off. When powered on, the scanner must have sole
access to the MicroSD card at all times. To prevent corrupted
data, computer access to the MicroSD card is disabled when the
radio is powered on and connected to the computer.
only enabled when the radio is connected to the PC and
powered off. When powered on, the scanner must have sole
access to the MicroSD card at all times. To prevent corrupted
data, computer access to the MicroSD card is disabled when the
radio is powered on and connected to the computer.
You can also connect the MicroSD Card to an external reader,
which may provide faster data transfer rates when compared to
accessing the card while it is in the radio.
which may provide faster data transfer rates when compared to
accessing the card while it is in the radio.
Inserting and removing the MicroSD Card
To remove the MicroSD Card from the PSR-800, turn the radio
off using the
off using the
button on the front of the radio.
WARNING:! To prevent corrupted data on the MicroSD Card, always turn
!
PSR-800 off using the front panel power key before opening the
!
battery compartment cover.
Locate the side of the radio with the USB cable jack. Note the
“MICRO SD” label on the side of the battery compartment cover.
When the battery compartment cover is removed, the MicroSD
Card can be found underneath of this label. Remove the battery
compartment cover by pressing gently where the door is marked
OPEN and sliding the door downwards until it stops,
approximately 1/4”. Lift the door away from the radio. Locate the
MicroSD Card. Using your fingernail or a small screwdriver,
carefully push the MicroSD Card inward until a click is felt, then
“MICRO SD” label on the side of the battery compartment cover.
When the battery compartment cover is removed, the MicroSD
Card can be found underneath of this label. Remove the battery
compartment cover by pressing gently where the door is marked
OPEN and sliding the door downwards until it stops,
approximately 1/4”. Lift the door away from the radio. Locate the
MicroSD Card. Using your fingernail or a small screwdriver,
carefully push the MicroSD Card inward until a click is felt, then
PSR-800 User Manual!
Page 42