ICOM 236803 User Manual
2
1
PANEL DESCRIPTION
!6 ANI CLEAR SWITCH [ANI CLR]
➥Push momentarily to turn OFF the alert tone
when receiving a call with ANI code.
➥Push for 1 sec. to clear the received ANI ID indi-
cation on the display and returns to original indi-
cation.
cation.
NOTE: This switch is no function available for some
versions.
versions.
!7 DEALER-PROGRAMMABLE SWITCH [PROG]
Toggles the pre-programmed function ON or OFF
when pushed.
when pushed.
!8 PROGRAMMED FUNCTION INDICATOR
Lights green while pre-programmed function is acti-
vated.
vated.
!9 DC INDICATOR
Lights green when in DC operation.
D
DFunction display
q MEMORY CHANNEL INDICATOR
Shows the selected memory channel.
w TRANSMIT POWER INDICATOR
Shows the output power level.
e AUDIBLE INDICATOR
“@” appears in an audible condition, disappears in
an inaudible condition. (When an audible condition,
audio mute is cancelled.)
an inaudible condition. (When an audible condition,
audio mute is cancelled.)
r ALPHANUMERIC INDICATORS
Shows the variety text or code information.
32
H
H@
H
ICOM
H
INC.
q
w e
r
■ Rear panel
q TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
➥Connects a transmit antenna (impedance: 50 Ω)
and outputs transmit signals.
➥When installing an optional internal duplexer
(supplied by third party), this connects the trans-
mit receive to an antenna.
mit receive to an antenna.
w EXTERNAL SPEAKER CONNECTOR [EXT SP]
Accepts a 4
Ω external speaker.
e REMOTE CONNECTOR [REMOTE]
Connects to the remote controller.
• See p. 3 for remote connector information.
r ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pgs. 3, 4 for accessory connector information.
t RECEIVE ANTENNA CONNECTOR [RX]
➥Connects a receive antenna (impedance: 50 Ω)
and inputs receiving signals.
➥When installing an internal duplexer (supplied by
third party), do not use this connector.
y AC POWER SOCKET [AC]
Connects the supplied AC power cable to a domes-
tic AC outlet.
tic AC outlet.
u GROUND TERMINAL [GND]
Ground the repeater through this terminal to prevent
electric shocks, TVI, BCI and other problems.
electric shocks, TVI, BCI and other problems.
i DC POWER INPUT TERMINALS [BATTERY]
Connects the 12 V storage battery for the repeater
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
CAUTION: NEVER short the (+) line of the DC
power cable to repeater’s chassis, when connecting
DC power cable to the [BATTERY] terminals. Oth-
erwise, there is danger of electric shock and/or
equipment damage.
power cable to repeater’s chassis, when connecting
DC power cable to the [BATTERY] terminals. Oth-
erwise, there is danger of electric shock and/or
equipment damage.
TX/TX•RX
EXT SP
REMOTE
ACC
RX
GND
AC
BATTERY
q
e
r
t
y
u
i
w