ICOM 318300 User Manual
8
93
DV MODE OPERATION
N
The IC-9100 can be operated in the digital voice mode,
including low-speed data operation, for both transmit
and receive. It can also be connected to a GPS re-
ceiver* to transmit/receive position data.
* Compatible with an RS-232 output/NMEA format/
including low-speed data operation, for both transmit
and receive. It can also be connected to a GPS re-
ceiver* to transmit/receive position data.
* Compatible with an RS-232 output/NMEA format/
4800bps/9600 bps
N #ALL
Set the desired
h52v
be used for DV operation, as described below.
NOTE:
)N
sign in the “CS” screen (Call Sign).
q Push [DVsDR] to select the DV mode.
w Push [MENU] one or more times to display the “M3”
screen (Menu 3).
s
the “D1” screen.
e Push [CS](F-1) to display the “CS” screen (Call
Sign).
s
the name.
r Push [Z](F-1) one or more times to display the
h52v
t Rotate [MAIN DIAL] to select the desired call sign.
s UR : “CQCQCQ,” individual station call signs
(U01–U99) or destination repeater call
signs*
signs*
1
is selected.
s
lected.
s R2 : “NOT USE
1
”*
2
or a link/gateway repeater call
sign is selected.
s
s
or [GRP](F-5)*
3
makes it more convenient when “UR,”
“R1” or “R2” is displayed. See the right column for de-
tails of the repeater call sign group selection.
tails of the repeater call sign group selection.
y Push [SET](F-4) to set the selected call sign to be
used for DV operation.
u Repeat steps r to y to set the other call signs.
i Push [Z](F-1) one or more times to return to the
“CS” screen.
NOTE:
peater name or the repeater call sign by pushing
[NAME](F-4) in the R1 and R2 screens.
[NAME](F-4) in the R1 and R2 screens.
*
1
‘/’ is displayed in front of the repeater call sign. The
repeater call sign with ‘/’ is used for the gateway CQ
calling.
calling.
*
2
For an area (local) repeater communication only
(Link repeater is not used.)
*
3
[GRP](F-5) is not used in the DR mode.
[CS]/[
√] [SET]
[MENU]
[DV
・DR]
[MAIN DIAL]
CS
C D
R > C S
U R
DSET
M 3
C S U
R
CQCQCQ
J A 3 Y U A
M
Y
R
1
R
2
NOT USE
Ú
UR
UR
C L R
C Q C Q C Q
E D T
N A M E
G R P
UR
UR
C L R
J G 3 Y M K
E D T
N A M E
G R P
UR
U01
J G 3 Y M K
S E T
G R P
Rotate [MAIN DIAL]
(OW
sGRP] or [GRP](F-5)*
3
for 1 second to
enter the group selection mode. Then rotate [MAIN
DIAL] to select the desired group. After selecting,
PUSH
DIAL] to select the desired group. After selecting,
PUSH
3
to display the re-
peater call signs in the group.
Or, you can select the repeater group using the key-
pad key.
- Only repeaters assigned to groups are selectable.
Or, you can select the repeater group using the key-
pad key.
- Only repeaters assigned to groups are selectable.
!BOUT