ICOM 325400 User Manual
31
■
Priority watch
A priority watch checks for signals on “priority channels”
while operating on a VFO frequency.
while operating on a VFO frequency.
D Memory or Call channel watch
While operating on a VFO frequency, the memory or Call
channel watch checks for signals on the selected channel
every 5 sec.
channel watch checks for signals on the selected channel
every 5 sec.
q
Select a desired memory channel or the Call channel.
w
Push
[FUNC](M), and then [PRIO](7) to start the watch.
• The decimal point “.”, on the frequency readout blinks.
• When a signal is detected on the channel, the watch resumes
• When a signal is detected on the channel, the watch resumes
according to the scan resume setting. (p. 30)
e
To cancel the watch, push any key except
[
], []/[],
[
MONI], [FUNC](M), or [PTT].
D Memory scan watch
While operating on a VFO frequency, a memory scan watch
checks for signals on each memory channel in sequence,
every 5 sec.
checks for signals on each memory channel in sequence,
every 5 sec.
q
Push
[VFO/MR/CALL] several times to select the memory
mode.
w
Push
[FUNC](M), and then [SCAN](5) to start a memory
scan.
e
Push
[FUNC](M), and then [PRIO](7) to start the watch.
• The VFO mode is selected, and the decimal point “.”, on the fre-
quency readout blinks.
• When a signal is detected on a channel, the watch resumes ac-
cording to the scan resume setting. (p. 30)
r
To cancel the watch, push any key except
[
], []/[],
[
MONI], [FUNC](M), or [PTT].
Memory channel
VFO frequency
5 sec.
VFO frequency
5 sec.
Memory scan
Mch 0
Mch 1
Mch 2
Mch 1
Mch 2
Mch 199
SKIP
7
SCAN OPERATION