ICOM ic-2720h User Manual

■ Accessing a repeater

q Set the receive frequency (repeater output frequency) on

the main band. (pgs. 11–13)

w

Push [DUP•MONI] one or two times, to select minus du-
plex or plus duplex.

• “DUP–” or “DUP” appears to indicate the transmit frequency for

minus shift or plus shift, respectively.

• When the auto repeater function is turned ON (available for the

USA version only), steps w and e are not necessary. (p. 28)

e Push [TONE•DTMF] several times to turn ON the subaudi-

ble tone encoder, according to repeater requirements.

• “T” appears 
• 88.5 Hz is set as the default; refer to p. 25 for tone frequency set-

tings.

• When the repeater requires a different tone system, see p. 26.

r Push and hold [PTT] to transmit.

• The displayed frequency automatically changes to the transmit

frequency (repeater input frequency).

• If “OFF” appears, confirm that the offset frequency (p. 27) is set

correctly.

t Release [PTT] to receive.

y Push [DUP•MONI] to check whether the other station’s

transmit signal can be received directly.

u To return to simplex operation, push [DUP•MONI] once or

twice, to clear the “DUP–” or “DUP” indicator.

i To turn OFF the subaudible tone encoder, push

[TONE•DTMF] several times until no tone indicators ap-
pear.

While receiving

While transmitting

Push [TONE•DTMF] once or twice

“T” appears

Push [DUP•MONI] once or twice

“DUP–” or “DUP” appear

23

4

REPEATER OPERATION

New2001

IC-2720H.qxd  02.9.9 8:12  Page 23 (1,1)