ICOM ic-2720h User Manual
59
11
OTHER FUNCTIONS
New2001
D
D Wide/Narrow setting
(Left band only)
Sets both the transmission and reception passband width
from wide and narrow.
When narrow is set, the transmission deviation and reception
passband width become half of the wide setting (approx.).
This setting can be set for each memory, call and VFO inde-
pendently.
This item appears when set mode is accessed from left band
only.
from wide and narrow.
When narrow is set, the transmission deviation and reception
passband width become half of the wide setting (approx.).
This setting can be set for each memory, call and VFO inde-
pendently.
This item appears when set mode is accessed from left band
only.
D
D Operating mode setting
NOTE: This item appears only when accessing set mode
from other than 900 MHz band.
from other than 900 MHz band.
Selects the operating mode for the desired frequency band
from FM and AM.
The selected mode is used for the previously selected oper-
ating frequency band— for example, when entering set mode
from 127 MHz band and AM is selected, AM is automatically
selected even FM is selected in other frequency bands.
This setting can be set for each memory, call and VFO inde-
pendently.
from FM and AM.
The selected mode is used for the previously selected oper-
ating frequency band— for example, when entering set mode
from 127 MHz band and AM is selected, AM is automatically
selected even FM is selected in other frequency bands.
This setting can be set for each memory, call and VFO inde-
pendently.
D
D Weather alert function
Turns weather alert function ON and OFF.
D
D 1st Lo frequency selection
Selects the 1st Lo (Local Oscillator) frequency from normal
(n) and reverse (r).
By changing local oscillator frequency, the transceiver may
reject interference or image frequencies, such as from other
stations spurious or the transceiver’s internal oscillator.
(n) and reverse (r).
By changing local oscillator frequency, the transceiver may
reject interference or image frequencies, such as from other
stations spurious or the transceiver’s internal oscillator.
This item can also be switched by pushing [SET•
] while
transmitting (pushing and holding [PTT]) for sub band (non-
main band) setting.
main band) setting.
It is helpful in case the transceiver receiving heterodyne spu-
rious emissions, or receiving on an image frequency from
own transmitter.
rious emissions, or receiving on an image frequency from
own transmitter.
The local oscillator frequency can be switched when selecting
a frequency within 118.000 to 160.000 MHz range in left
band, or 400.000 to 450.000 MHz range in right band only.
a frequency within 118.000 to 160.000 MHz range in left
band, or 400.000 to 450.000 MHz range in right band only.
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
U.S.A. version only
MAIN
T X
M
MAIN
T X
AM
M
MAIN
T X
M
IC-2720H.qxd 02.9.9 8:12 Page 59 (1,1)