ICOM IC-756PRO2 User Manual

SCANS

■

Tone scan

The transceiver can detect the subaudible tone fre-
quency in a received signal. By monitoring a signal
that is being transmitted on a repeater input fre-
quency, you can determine the tone frequency re-
quired to access the repeater.

Set the desired frequency or memory channel to
be checked for a tone frequency.

Push [AM/FM] several times to select FM mode.

Push [TONE] for 1 sec. to enter the tone frequency
screen.

Push [(F-1)

] or [(F-2)

] to check the repeater

tone frequency or tone squelch frequency, respec-
tively. (pgs. 47, 48)

Push [(F-5)T-SCAN] to start the tone scan.

• “SCAN” flashes while scanning.

When the tone frequency is detected, the tone
scan pauses.

• The tone frequency is set temporarily on a memory

channel. Program into the memory channel to store the
tone frequency permanently.

• The decoded tone frequency is used for the repeater

tone frequency or tone squelch frequency.

To stop the scan, push [(F-5)T-SCAN].

Push [EXIT/SET] to exit the tone frequency
screen.

TONE FREQUENCY

188.8Hz

SCAN

88.5Hz

T-SQL TONE

REPEATER TONE

TONE

AGC

FAST

VOX

VOX
OFF

T-SCAN

DEF