ICOM ic-r2 User Manual

19

6

SCAN OPERATION

■

D

Unwanted frequencies can be skipped and programmed as
skip channels when full scan, band scan or programmed scan
is pausing.

q

Start full scan, band scan or programmed scan. (p. 16)

w

While receiving an unwanted signal and scan pauses,
push [FUNC] + [

(TS)

SKIP] for 2 sec. to program the re-

ceived frequency as a skip frequency.

• The receiver emits 3 beeps and the scan resumes.
• Non-programmed memory channels (blank channels) are used

for skip frequency programming in reverse sequence.

• To scan the skip frequency after programming, cancel the skip

information (p. 18) or clear the memory channel (p. 14).

D

The frequency skip function can be turned OFF. In this case,
the frequencies will not be skipped even if skip information is
programmed and “P SKIP” does not appear.

q

Select VFO mode with [V/M].

w

Push [FUNC] + [

(TS)

SKIP] to toggle the frequency skip

function ON or OFF.

• “P SKIP” appears when the function is turned ON.

The frequency skip
function is OFF.

The frequency skip
function is ON.

Indication while programming

Indication while pausing