ICOM ic-r2 User Manual

■

q

ANTENNA CONNECTOR (p. 1)
Connects the supplied antenna.

• An optional AD-92SMA is available for connecting an antenna

with a BNC connector.

w

MONITOR SWITCH [SQL] (pgs. 10, 27)

➥

Push and hold to temporarily open the squelch and
monitor the operating frequency. (default behaviour)

➥

While pushing, rotate the tuning dial to set the squelch
threshold level.

➥

Push [FUNC] + [SQL] to toggle the attenuator circuit ON
and OFF.

e

FUNCTION SWITCH [FUNC]
While pushing this switch, other switches and tuning dial
perform secondary functions.

• “Push [FUNC] + a switch” means “while pushing the [FUNC]

switch, push the switch.”

r

➥

Push to select the operating band (VHF, UHF, etc.). (p. 6)

• Broadcast band, HF band, 50 MHz band, VHF avionics band,

144 MHz band, 300 MHz band, 400 MHz band, 800 MHz
band and 1200 MHz band can be selected.

• While pushing this switch, rotating [DIAL] also selects the op-

erating band.

➥

Transfers the displayed frequency to the VFO in mem-
ory mode. (p. 6)

➥

Push [FUNC] + [BAND] to enter the scan edge set mode
in VFO mode. (p. 17)

➥

Push [FUNC] + [BAND] to enter the bank scan set mode
in memory mode. (p. 16)

2

2

q

w

e

r

t

y

u

i

o

Function display
(p. 4)

SPEAKER

!0

!1