Eques Technology Co. Limited R20 User Manual

Our Door Part

Indoor Part（battery）

Charger

USB Cable

Screws

Reinforced Shim

Outdoor Part

Doorbell

Camera

Reset

Set

PIR intelligent 

motion detection

Screws

Door

Peephole

Indoor Part Reinforced Shim Indoor Part Cover

UP

Indoor Part（battery）

White Plug

Copper Plug

Copper Plug

White Plug

www.eques.com.cn

Please don’t install the camera in harsh environment, such as  high tempera-
ture, high humidity, lost of dust, smog, rain, or the camera will be damaged.
Please don’t squeeze lens and black round ball on the outdoor part, or the 
hardware will be damaged.
During installation, please be careful not to pull the wire too hard, and please 
also don’t scratch or cut the wire.
Please use the standard charger in the package. Other types of charger will fail 
to recharge power or damage system.

Door Hole Range: 12mm---50mm
Door Thickness Range：35mm----110mm

Before installation, please check the door thickness to choose the right 
size screws.
Door thickness: 35mm—65mm，use 35mm screws
Door thickness: 65mm—95mm，use 65mm screws

Door thickness: 95mm—110mm，use 80mm screws (package excluded)

Out Door Part        1 Pieces

In Door Part           1 Pieces

Charger                    1 Pieces

Reinforced Shim      1 Pieces

Screws               ２Sets

USB Cable          1 Pieces

Screw the right screws into the outdoor part, tear out the viscose foam protective papers on the back, straighten out the 

wire, and pass the wire and outdoor part through door hole to house ( tips: users can use the paper tube to lead the 

wire to pass door hole) ,fix outdoor part, in the house, tighten the screws and fix the indoor part. Then insert the white 

plug on the white outlet and copper plug into the copper hole. Installation is finished.