Shenzhen Coban Electronics Co. Ltd. 302 User Manual
Wiring diagram
Note: The orange wire can be connected to the original car horn; it can also be
connected to the siren you buy with the tracker. (Siren is Option)
6.1.5 Knowing about the type of the door trigger is positive or negative trigger. Please
connect the green wire to the door control circuit if it is positive, and connect blue
wire if it is negative.
wire if it is negative.
6.1.6 Please put SOS button at the place driver can touch.
6.1.7 Insert the shock sensor plug into the sensor jack. (Shock sensor is Option)
6.1.8 Insert the external monitor Microphone into the monitor jack.
6.1.9 Connect the GPS and GSM antenna to the right connector, and find an appropriate
6.1.7 Insert the shock sensor plug into the sensor jack. (Shock sensor is Option)
6.1.8 Insert the external monitor Microphone into the monitor jack.
6.1.9 Connect the GPS and GSM antenna to the right connector, and find an appropriate
place to fix the antennas to make sure it receives signals well.
6.2 SIM CARD Installations
6.2.1
Use a tweezers or a sharp thing to touch the SIM CARD popup switch,
the SIM CARD slot will pop up, take out the SIM card slot and put SIM card in it. And
then put the SIM card slot back to its original position after confirm the SIM card in the
right place.
then put the SIM card slot back to its original position after confirm the SIM card in the
right place.
6.2.2
Please make sure the SIM card is for GSM network and able to execute the function
of incoming calls display, no calls can be diverted and the PIN code is locked. The SMS
format must be TXT format, and can’t recognize the PDU format.
format must be TXT format, and can’t recognize the PDU format.