ODSONIC INTERNATIONAL CO. LIMITED 8810S User Manual
【Quick Installation Guide─AllCam
x
Baby Temperature Monitor
v1.0
】
2 QIG 08-2017 / v1.0
Baby Temperature Monitor – Pairing Process
After setting up the Camera, click the IoT Devices button in Live View
(Pic.8)
to enter the IoT
Devices Menu.
○
1 Please place the Baby Temperature Monitor within 2 meters of the Camera.
○
2 Press the “Pair” key on the APP on your phone.
(Pic.9)
○
3 Hold the Pairing Button on top of the Baby Temperature Monitor
(Pic.7 [Below])
for 3 seconds,
and release the button. Then wait for 3 to 5 seconds for it to pairing process.
○
4 After Successful pairing, the Baby Temperature Monitor Icon will be added to the IoT Devices list.
(Pic.10)
If it was not successful, please make sure the sensor is close to the Camera and the
Pairing Button was held down correctly and try again.
○
5 After pairing, click the Baby Temperature Monitor Icon to enter the settings menu.
(Pic. 11,
Pic.12)
Here you may name the sensor, and set the high/low threshold. Please remember to
press the “Set” button to save your settings.
Pairing Button
(Pic.7)
※Please keep the Baby Temperature Monitor within 2 meters when pairing, and move
the sensor to the desired location after pairing is done.
(Pic.8) (Pic.9) (Pic.10)
(Pic.11) (Pic.12)