ODSONIC INTERNATIONAL CO. LIMITED 9100N User Manual
【Quick Installation Guide─Infant Temperature Monitor
v1.0
】
3
07-2017 / v1.0
▲Sound Level Settings Cycle
(Pic.6)
2.2.2 Units of Temperature Options
(℃ / ℉)
❶ The
℃ icon will start flashing, indicating this option is ready for setting.
❷ By pressing the
⊝
Button, it will cycle between the
℃ / ℉ options
。
❸ To confirm the Unit of Temperature
(℃ / ℉)
，Press the
⊕
Button, and it will automatically initiate
the next Option.
2.2.3 Body Temperature High/Low Threshold Options
❶ The
H
icon
and the Value will start flashing, indicating this option is ready for setting.
❷ Press the
⊝
Button, it will display the selectable values for High-Temperature Threshold.
(Table 4)
Press the
⊝
button to cycle through the different values.
✦Reminder~ You must set the High-Temperature Threshold Value first. To set the Low-Temperature
Threshold Value, follow step ❷, refer to
(Table 5)
for the Low-Temp. Values.
❸ After confirming the High/Low Threshold Values, press the
⊕
Button, and it will automatically
initiate the next Option.
2.2.4 Ambient Temperature High/Low Threshold Options
❶ The
H
and the Value will start flashing, indicating this option is ready for setting.
❷ Press the
⊝
Button, it will display the selectable values for High-Temperature Threshold.
(Table 6)
Press the
⊝
button to cycle through the different values.
✦Reminder~ You must set the High-Temperature Threshold Value first. To set the Low-Temperature
Threshold Value, follow step ❷, refer to
(Table 7)
for the Low-Temp. Values.
❸ After confirming the High/Low Threshold Values, press the
⊕
Button, and it will return to the
Sound Level Options
3.
✦FAQ✦
(1) Is the temperature accurate immediately after powering on the device?
* Please wait 30 seconds after the Baby Temperature Monitor is powered on, to allow the sensor to
warm up and display a more accurate reading.
(2)
What is the effective detection range of the Baby temperature Monitor? How does it determine
where to take the temperature?
* The effective range is a 35 degrees cone from the center of the Thermal Image Receiver, the sensor
will automatically search for the point with the highest-temperature (from the forehead) and
continously monitor the temperature.
(3) How do I save the Options and Settings after setting them?
* After finishing setting all Options above, please remember to press the ⦿ Button to return to the
main menu and to save all Options and Settings!
(4) How do I clear the Options? / How do I unpair the Sensor and the Receiver?
*If you wish to clear the options and unpair the sensor/reciever, simply hold down the recessed Reset
Button next to to the Power Button using a small and slim object. (a paper clip.)
(5) What happened to the display? Why did it turn off while I was changing the options?
* The Liquid Crystal Display (Receiver) will automatically hibernate after five seconds of inactivity. Press
the ⊕ Button to continue choosing the options.
Icon Flashing:
(Waiting for Confirmation)