SENWA MEXICO S.A.DE C.V SP200 User Manual

Page of 32
Use the travel charger to charge 
Ø Put the battery into the phone correctly; 
Ø Open the rubber cover at the bottom of the screen on the left side of the 
phone, insert the charger with the arrow on the screen, insert the charger into 
the charging connector, and connect the travel charger to a standard power 
outlet. 
Ø After inserting the charger, the battery strength icon at the top right of 
the screen scrolls to indicate that charging has begun. When the battery is 
full, the charge icon will stop scrolling and the battery symbol on the screen 
will display full. 
Ø After charging is complete, disconnect the charger from the standard power 
outlet, and then press and hold the button on both sides of the charger to 
disconnect the charger from the charger. 
note: 
1. Please use the standard battery and charger, otherwise it may cause an 
explosion. 
2. If the battery is completely discharged, the battery icon will not appear 
for 2 to 3 minutes. Generally based on the current state of the phone (whether 
to boot, call, etc.), the charging time is 2 to 5 hours. 
3. Please use the charger to charge, try to avoid using USB cable charging. 
4. To get the best performance from a new battery, complete the battery two to 
three charge-discharge cycles. The initial charge of the new battery several 
consecutive charge for more than 10 hours.
 
Power on and off
 
Boot 
Press and hold the power button for about three seconds. 
 
Shutdown 
Press and hold the power button for about three seconds.
 
caveat: 
Prohibit the use of mobile phones or the use of mobile phones in your area may 
cause interference and danger 
Please do not open your phone, and to ensure that the phone does not turn on 
the timer switch and other functions.