Polygroup Limited LUMALIGHT-C User Manual

FOR ABOVE GROUND SWIMMING POOLS

Should you encounter a problem with your Polygroup

®

 Product, please do not return the product to the place or purchase. All Warranty claims must be made directly to 

Polygroup

®

. Prior to contacting Customer Service, please first review the Troubleshooting Guide in the Installation Manual, or review the FAQ at www.Polygroup.com. 

Please review setup instruction videos on www.Polygroup.com/video. If you are still unable to correct the problem, please contact Polygroup

®

 customer service at (888) 

919-0070. Have the product type and your purchase receipt ready. Our Customer Service Representative will assist you in resolving the problem. You may be asked to 

return all or part of the product for inspection and/or repair. Do not return any product to Polygroup

®

 without a Return Authorization number.

Polygroup

®

 Limited (Macao Commercial Offshore), (hereinafter “Polygroup

®

”) warrants to the original purchaser only, the Luma Light Pool against defects in 

material and workmanship for 180 days from the date of purchase. Original Purchaser must retain proof of such purchase in the form of an original store sales 

receipt and must produce such upon request by Polygroup

®

 or its designated agents. Warranty claims cannot be processed without a valid proof of purchase.

This Limited Warranty applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in 

Polygroup

®

’s sole discretion. Consequential damages, including claims for loss of water, pool chemicals, damage, or labor are not covered under this Limited 

Warranty.

This Warranty will be declared invalid should the Purchaser modify or repair the product themselves or by unauthorized persons; use non-Polygroup

®

 parts or 

accessories with the product; use the product in contravention of the manufacturer’s Instructions; use improper voltage; abuse the product in any way; or through 

accident or negligence. Normal wear-and-tear is not covered under this Warranty, nor are acts of God outside the control of Polygroup

®

.

IN NO EVENT SHALL Polygroup

®

, THEIR AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER 

PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or others jurisdictions do not allow the exclusion or limitation of incidental or 

consequential damages, so the above limitation or exclusion may not apply to you.

LIMITED WARRANTY

DO NOT RETURN PRODUCT TO STORE

For any set up and troubleshooting issues, please visit www.Polygroup.zendesk.com.

Customer Service: (888)919-0070  

To order parts and accessories,

please visit www.Polygroupstore.com

READ AND, KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.

EST. Extended operating days and hours during peak season requirements.

12

DISTRIBUTED BY: Polygroup

®

 LIMITED (MACAO COMMERCIAL OFFSHORE)

Unit J, 10

th

 Floor, Macau Square, Av do Infante D.Henrique, No.43-53A, Macau

PGIM 

Luma Light Pool

_2015 Aug_V01

POST THIS WARNING NEAR YOUR POOL

Winterizing Your Above Ground Pool 

After usage, you can easily empty and store away your pool in a safe place. Some pool owners, however, choose to leave their pool up all year round. In cold areas, 

where freezing temperatures occur, there can be a risk of ice damage to your pool. We therefore recommend you drain, disassemble and properly store the pool, when 

the temperature drops below 32 degrees Fahrenheit (0 degrees Celsius).  

Clean the pool water thoroughly. If the type is Quick Set pool, make sure that the top ring is properly inflated:

1. Clean the pool water thoroughly. If the type is an Easy Set Pool or an Oval Frame Pool, make sure that the top ring is properly inflated.

2. Remove the skimmer (if applicable) or any accessories attached to the threaded strainer connector. Replace strainer grid if necessary. Be sure all accessories parts   

    are clean and completely dry before storage.

3. Plug the Inlet and Outlet fitting from the inside of the pool with the plug provided (sizes 16' and below). Close the Inlet and Outlet Plunger Valve (sizes 17' and above).

4. Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is completely dry before storage.

5. Remove the hoses that connect the pump and filter to the pool.

6. Add the appropriate chemicals for the winter period. Consult your local pool dealer as to which chemicals you should use and how to use them. This can vary greatly 

    by region.

7. Cover pool with Intex Pool Cover. IMPORTANT NOTE:  Polygroup® POOL COVER IS NOT A SAFETY COVER.

8. Clean and drain the pump, filter housing and hoses. Remove and discard the old filter cartridge. Keep a spare cartridge for the next season.

9. Bring pump and filter parts indoors and store in a safe and dry area, preferably between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit

    (40 degrees Celsius).