Cosonic Acoustic Technology Co. Ltd. HXEP250 User Manual
Por manual de instrucciones e información de garantía en español visítenos en
www.hmdxaudio.com
The HMDX Craze has friends—like lots of them. Invite them
along next time for an even more epic night. You can check
out all their online profiles at www.hmdxaudio.com.
Setup is pretty easy, but we put a manual together just in case
you need it. It’s full of information and sarcasm—just like that
English teacher you had that crazy semester.
Package Contents
Allow Us to Shed Some Light
Like any amazing couple, this one starts with a connection—one between
your device and the earbud’s Bluetooth.
Here’s how it works:
1. We know you’re probably going to think, “derp” with this one, but we
Here’s how it works:
1. We know you’re probably going to think, “derp” with this one, but we
have to say it: Make sure the smartphone, tablet or computer you want to
hook up to the earbuds has Bluetooth. (There. We got that out of the way.)
2. Turn on the earbuds and look for the little blinking light.
3. Do whatever your device needs you to do on its end. (We don’t know
3. Do whatever your device needs you to do on its end. (We don’t know
what you’re using. We’re not spies.)
4. Look for HMDX CRAZE in your device’s Bluetooth list or click
YES—whatever pops up on your device—and BAM you’re connected.
5. Now hit PLAY on your earbuds and crank it up—or down if you’re lame.
You’re probably only going to have to do this once, unless your device goes
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth will find each other every time just as long as the earbuds are set
to Bluetooth and your device’s Bluetooth is, you know—on.
If you’re connecting to a computer, you may have some extra steps on that
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code.
Depending on your device you may be prompted to enter a pairing code.
If prompted enter “0000” as the code.
To clear the pairing history hold the POWER button for 8 seconds.
Note: If you turn on your Craze Earbuds but haven’t started the party,
To clear the pairing history hold the POWER button for 8 seconds.
Note: If you turn on your Craze Earbuds but haven’t started the party,
they will automatically power off after 2 minutes of unpaired inactivity.
Bluetooth
®
Connection: It’s a Setup
CHARGE
Flashing Red
Low Battery
Charging
Fully Charged
Red (when plugged in)
Light turns off (while
plugged in)
Quick Blue Flash
Reconnect Mode
Slow Blue Flash
Connected
Quick Blue/Red Flashing
Pairing Mode
What It Looks Like
What it Means
HX-EP250
Hey. Have we seen you here before?
Register your earbuds at www.hmdxaudio.com.
Information like where you bought it and how you’re
using it is like gold for the people who make these earbuds. Do them a solid, will ya?
USER GUIDE AND WARRANTY INFORMATION
1
3
2
2
4
5
Control Your Destiny…or at Least Your Earbuds
1. That’s the power button, press and
hold for 5 seconds to power on.
2. Turn the music up or down. (Wait, why
do you need to turn it down?)
3. Push it to play, push it again to pause.
4. That light lets you know when your
4. That light lets you know when your
device is charging and when Bluetooth
has the hook-up.
5. The power cord goes here.
Charging the earbuds is so easy you’ve
probably figured it out by now, but just in
case, you’ve got two options: your
computer or a wall outlet.
1. The cord that came with the earbuds
—the one with the USB on one end and
the Micro USB on the other—will work
with your computer.
2. If you want to use the wall outlet, you’ll
need to pick up a power cord with a
Micro USB the next time you’re at the
store, or use any USB AC adapter,
including the one for your cell.
Now go get ready for an epic night while your earbuds do too.
They need about 3 hours of me time for 4 hours of party time.
Just Charge It
User Manual
Charging Cord
Earbuds
Ear Hooks
Ear Tips