CartaSense Ltd. DASBRDUSG01 User Manual
U-Sensor Gateway
12
Version; 1.3
Table 6: USG indicators & controls
Label
Name
Description
1
UHF Antenna Connector
used for communication with CartaSense Sensors. exists in all
USG types
USG types
2
LAN Connector
Connection to LAN network
3
Red LED
Status indicator
4
Green LED
Status indicator
5
Yellow LED
Status indicator
6
On/off switch
Turn on/off the U-Sensor Gateway
7
External DC supply
Connection to 9-24V DC source
8
Configuration Switches
For proper operation – all switches should be in the OFF state
(down position- for qualified technician use)
(down position- for qualified technician use)
9
SIM Card Compartment
To hold the SIM card
10
SIM Card Push Button
Pushing this button pulls out the SIM card drawer to handle the
card
card
11
Maintenance connector
For authorized and qualified service technicians only.
12
Cellular Antenna connector
To connect the cellular antenna for connection with the
communication server
communication server
13
GPS Antenna Connector
To connect the GPS antenna
14
U-Sensor Gateway Serial
number
number
Serial number of the U-Sensor Gateway
2.6.1.1 Assembly of the USG
Unpack the USG unit, the attached A/C adaptor
1
, and the
attached UHF and cellular antennas
2
.
Connect the UHF and cellular antennas.
Connect the power adaptor (7).
2.6.1.2 Activating the USG
Turn on the USG, via the power switch (6). After a short "lamp test" where all
lights are on together, the LEDs will blink in a circular manner ( red green
yellow and back to red) for a period of around 30seconds.
The normal operation is that the red LED will blink until the USG connects to
the server. After connection to the server, the green LED will light, with blink
burst of the yellow LED, once per 18 seconds.
lights are on together, the LEDs will blink in a circular manner ( red green
yellow and back to red) for a period of around 30seconds.
The normal operation is that the red LED will blink until the USG connects to
the server. After connection to the server, the green LED will light, with blink
burst of the yellow LED, once per 18 seconds.
1
Power adaptor varies between stationary and truck mobile installations.
2
Type of antennas depends on USG interface, namely; Ethernet or cellular
connections.