SHENZHEN MAXIMUM ELECTRONICS CO. LTD. SC200AEL User Manual
2. Turn the waterproof case (or mounting adapter) clockwise onto the ¼-20 screw of the
handlebar clamp until secure
3. Turn the Locking Wheel so it applies pressure to the case to keep the connection
secure.
4. Loosen the Bar Clamp Bolt until the screw can be pushed 90º upward.
5. The bottom half of the Bar Clamp can be opened to allow you to wrap the Handlebar
5. The bottom half of the Bar Clamp can be opened to allow you to wrap the Handlebar
Clamp around the actual handlebar of your bicycle.
6. After positioning the Handlebar Clamp where you want it, close up the bottom half of
the clamp and tighten the Bar Clamp Bolt.
7. Loosen the Tilt Knob, to adjust for the proper aiming angle; then tighten the knob.
8. Panning adjustments can be made by loosening the Locking Wheel, adjust the pan
8. Panning adjustments can be made by loosening the Locking Wheel, adjust the pan
angle; then tighten the wheel.
HELMET MOUNTING SYSTEM
1. Helmet Belt
2. Helmet Mount
3. ¼-20 Screw
4. Locking Wheel
5. Tilt Knob
1. Insert the free end of the Helmet Belt through one of the slots in the base of the
3. ¼-20 Screw
4. Locking Wheel
5. Tilt Knob
1. Insert the free end of the Helmet Belt through one of the slots in the base of the
Helmet Mount.
2. Thread the same end in to the helmet vent and then back up to the Helmet Mount
through another vent. Then insert the belt through the other side of the Helmet mount.
Then insert the belt back through the helmet vent.
Then insert the belt back through the helmet vent.
3. You should have now both ends of the belt inside the helmet. Take both ends of the Belt
and pull to tighten and then attach together with the Velcro strap.
4. Turn the Waterproof case (or mounting adapter) onto the ¼-20 screw of the Helmet
Mount until secured
5. Turn the Locking Wheel so it applies pressure to the case to keep the connection secure.
6. Loosen the Tilt Knob, to adjust for the proper aiming angle; then tighten the knob.
7. Please note this helmet mount will only work with vented helmets.
6. Loosen the Tilt Knob, to adjust for the proper aiming angle; then tighten the knob.
7. Please note this helmet mount will only work with vented helmets.
Specifications
Images sensor
:
2.0MP CMOS Sensor
Photo: 5MP (2592x1944), 3MP (2048X1536), 1MP (1280X720)
Video: 720p (1280X720p FPS 30 or VGA (640X480) FPS 60
Photo Format: JPG
Video Format: AVI HD
3 Modes: Video, Stills, Car or sports Mounted Mode
LCD Display: 2” full color touch screen
FOV: 120°
Battery Capacity: 350maH
Video: 720p (1280X720p FPS 30 or VGA (640X480) FPS 60
Photo Format: JPG
Video Format: AVI HD
3 Modes: Video, Stills, Car or sports Mounted Mode
LCD Display: 2” full color touch screen
FOV: 120°
Battery Capacity: 350maH