SHENZHEN BRIGHT FUTURE TECHNOLOGY CO. LTD. QC55928 User Manual
User Manual
4
3. Bluetooth
Turn on Bluetooth or set the phone can be detected
1) Press menu,then press settings>wireless & networks.
2) Press Bluetooth to open the Bluetooth function. After started, the status box will show this icon (
). Press “scan for
devices”the it starts to scan for all devices within range.
3) Press Bluetooth settings, all the devices founded will display in the list under the icon.
(select the box “can be detected”, set it to be detected, the other Bluetooth devices will be able to find
the phone.)
the phone.)
Pairing and connection of Bluetooth headset
1) Press home>menu, then press settings.
2)Press wireless and internet>Bluetooth settings, then select Bluetooth box, then your phone will scan for the
Bluetooth devices within range ,and show the founded devices in the list under the icon.
2)Press wireless and internet>Bluetooth settings, then select Bluetooth box, then your phone will scan for the
Bluetooth devices within range ,and show the founded devices in the list under the icon.
Tips:
a. If the scan can’t find your equipment, press scanning equipment to re-scan it.
b. Make sure that the devices wanted are under the detected mode.
b. Make sure that the devices wanted are under the detected mode.
3) Press headset in the equipment list to finish the connection.
Notices:generally Bluetooth devices need password to be paired, often use「0000」as the default password.4)The
pairing and connecting status will show under the headset in the Bluetooth devices list. When the headset
pairing and connecting status will show under the headset in the Bluetooth devices list. When the headset
connected to your phone, the status box will show this icon(
)means connected. Then you can use the
headset to make or receive callings.
Cut the connection to the Bluetooth
1) Press home>menu>settings>wireless and internet>Bluetooth settings.
2)
In the list of Bluetooth equipment, press or tap and hold the connected hand-free headset.
3) Press and select “cancel the pairing”.
Bluetooth proximity sensor
After pairing the two devices, you can test out the signal is strong or weak by the Bluetooth proximity sensor
device
device
4.
Mail
Load Email
Enter the correct address and password >settings correct port and POP server, check the server settings automatically.
Set the correct SMTP server, check the mails server’s sending and receiving settings, then enter the specified account
name and displayed name on the outing e-mail.> Finish.
Create and send mails
When creating mails, select mails > create mails. Enter the address(recipient)、theme and contents. Press MENU you
could ‘append’、‘Add Cc/Bcc’, select send or discarded or save as draft.