Shenzhen B&W Electronics Development Limited 14BWSH1 User Manual
The SB60 is operated with a rechargeable battery. Charge the
battery completely before its first use.
1. Connect the USB cable to a general USB power supplier.
2. Connect the charger to the correct outlet.
3. When the charger is connected to the headset, the red
indicator light will turn on. A full charge may take up to 1hour.
4. When the battery is fully charged, the red indicator light will
turn blue. Disconnect the charger from the headset and the
outlet. The headset is ready to use
battery completely before its first use.
1. Connect the USB cable to a general USB power supplier.
2. Connect the charger to the correct outlet.
3. When the charger is connected to the headset, the red
indicator light will turn on. A full charge may take up to 1hour.
4. When the battery is fully charged, the red indicator light will
turn blue. Disconnect the charger from the headset and the
outlet. The headset is ready to use
NOTE:
For first time use, please charge the headset fully.
- The fully charged battery has power for up to 5 hours of talk-time and 4.5 hours music playing time, and
up to 300 hours of standby time. However, the talk and standby times may vary when used with different
mobile phones or other compatible Bluetooth® devices, usage settings, usage styles, and environments.
When the battery power is low, the headset will remind you by voice prompt "Battery low" every 20
seconds, and the red indicator light starts to flash.
- For using the SB60 with an iPhone, an additional battery meter will be activated and the remaining
battery capacity will display on your phone.
- The fully charged battery has power for up to 5 hours of talk-time and 4.5 hours music playing time, and
up to 300 hours of standby time. However, the talk and standby times may vary when used with different
mobile phones or other compatible Bluetooth® devices, usage settings, usage styles, and environments.
When the battery power is low, the headset will remind you by voice prompt "Battery low" every 20
seconds, and the red indicator light starts to flash.
- For using the SB60 with an iPhone, an additional battery meter will be activated and the remaining
battery capacity will display on your phone.
NOTE:
- If pairing is not completed within 2 minutes, the headset will turn off. If this happens, please repeat the
pairing steps.
- The SB60 supports Multi-connection that allows for the simultaneous use of the SB60 with two mobile
phones. After paring successfully with 2 mobile phones, switch off the headset and switch on again, the
headset will connect to both 2 mobile phones automatically. Otherwise, you can connect the headset on
the cellphone manually.
pairing steps.
- The SB60 supports Multi-connection that allows for the simultaneous use of the SB60 with two mobile
phones. After paring successfully with 2 mobile phones, switch off the headset and switch on again, the
headset will connect to both 2 mobile phones automatically. Otherwise, you can connect the headset on
the cellphone manually.
NOTE:
- To conserve power, if the headset is not connected to a device for approximately 10 minutes, the headset
will turn off automatically.
will turn off automatically.
SPORT
Quick start manual
Aduro SB60
Product Specifications
Making Calls
Adjusting the Volume
Safety & General Information
Charging The Battery
Pairing Your Device
Playing Music
Turning your Device On & Off
Product Overview
Bluetooth
®
specification: V3.0
Supported profile: HSP, HFP, A2DP, AVRCP
Operation range: Up to 10 met ers
Talk time: 6 hours
Play time: 5 hours
Standby time: 200hours
Charge time: 1 Hours
Operation range: Up to 10 met ers
Talk time: 6 hours
Play time: 5 hours
Standby time: 200hours
Charge time: 1 Hours
Before you use your headset the first time, you must pair the unit with a
Bluetooth® enabled mobile device. Pairing is a one-time process and
required only for the first connection with the Mobile phone. The SB60 can
be connected to two mobile devices simultaneously.
1. Keep the SB60 within 1 meter range of a Bluetooth enabled device.
2. Press and hold the Power/Play button for about 5 seconds, the indicator
light will flashe red and blue intermittently -
The device is now in pairing mode.
3. Find the Bluetooth setting of your Mobile phone and start the search
for Bluetooth devices.
4. From the list of devices found, select the "ADURO SB60".
Bluetooth® enabled mobile device. Pairing is a one-time process and
required only for the first connection with the Mobile phone. The SB60 can
be connected to two mobile devices simultaneously.
1. Keep the SB60 within 1 meter range of a Bluetooth enabled device.
2. Press and hold the Power/Play button for about 5 seconds, the indicator
light will flashe red and blue intermittently -
The device is now in pairing mode.
3. Find the Bluetooth setting of your Mobile phone and start the search
for Bluetooth devices.
4. From the list of devices found, select the "ADURO SB60".
5. If required, enter the PIN code "0000" and confirm the entry. Once the
pairing process was successful, the SB60 will connect to your device
automatically then switch to standby mode, the indicator will flash blue
every 5 seconds
pairing process was successful, the SB60 will connect to your device
automatically then switch to standby mode, the indicator will flash blue
every 5 seconds
6. If you want to pair two Bluetooth devices, please
1.First, pair headset with A bluetooth device
2.Switch off the headset, and switch on again
3.Pair and connect to B bluetooth device
4.Keep B bluetooth device connected, and pair A bluetooth again,
headset will connect with two device automatically.
Turning it on -
Hold the Power/Play for 3 seconds to turn on your headset. If your headset
has completed the pairing process successfully, when the headset is turned
on, it will connect to the phone you last connected automatically. Please
ensure your device’s Bluetooth function is active.
Hold the Power/Play for 3 seconds to turn on your headset. If your headset
has completed the pairing process successfully, when the headset is turned
on, it will connect to the phone you last connected automatically. Please
ensure your device’s Bluetooth function is active.
Turning it off-
Hold the power button for 3 seconds to turn off the headset. the Red
indicator will flash red.
Hold the power button for 3 seconds to turn off the headset. the Red
indicator will flash red.
Play/Pause
Press Power/Play button to play or pause music
.
Next/Previous song
Press and hold Next button to skip to next song , press and hold
Previous button to go back previous song.
Press Power/Play button to play or pause music
.
Next/Previous song
Press and hold Next button to skip to next song , press and hold
Previous button to go back previous song.
Increase/Decrease volume
Press Volume Up button to increase volume, press Volume Down button to
decrease volume.
Press Volume Up button to increase volume, press Volume Down button to
decrease volume.
Last number re-dialing
At standby status, double press the Answer Button
- the last number you dialed will be re-dialed.
At standby status, double press the Answer Button
- the last number you dialed will be re-dialed.
Note:
The last number re-dialing is available only for the first device if two Mobile phones are connected.
The connection sequence can be determined by reconnect manually.
Answering a call
Press the Answer button shortly to answer the incoming call.
Reject an incoming call
Press and hold Answer button for 2 seconds to reject the incoming call.
Press the Answer button shortly to answer the incoming call.
Reject an incoming call
Press and hold Answer button for 2 seconds to reject the incoming call.
Transferring a call
Press and hold Volume Up for 2 seconds to transfer the call between the
phone and headset.
Ending a call
Press the Answer button shortly to end a call.
Press and hold Volume Up for 2 seconds to transfer the call between the
phone and headset.
Ending a call
Press the Answer button shortly to end a call.
Call-waiting
If there is an incoming call while a call is in progress, press the Answer
button shortly to accept the waiting call and end the current call.
If there is an incoming call while a call is in progress, press and hold the
Answer button for 3 seconds to accept the incoming call and place the
current call on hold.
If there is an incoming call while a call is in progress, press the Answer
button shortly to accept the waiting call and end the current call.
If there is an incoming call while a call is in progress, press and hold the
Answer button for 3 seconds to accept the incoming call and place the
current call on hold.
Note:The same operation could be performed in case of Multi-connection.
Press the Volume Up and Volume Down button to adjust the volume.
Mute
While a call is in progress, press and hold Volume Down button for 2
seconds to mute the headset, a remindful tone would be heard every 10
seconds.
Repeat the operation to un-mute.
Mute
While a call is in progress, press and hold Volume Down button for 2
seconds to mute the headset, a remindful tone would be heard every 10
seconds.
Repeat the operation to un-mute.
5. Do not modify, repair or disassemble device (Especially the battery).
Doing this will void the warranty.
6. Do not place heavy objects on the device.
7. Use only the supplied and approved chargers.
8. Unplug this device when unused for long periods of time or during
lightening storms.
9. The battery used in this device may present a risk of fire or chemical
burn if mistreated.
Doing this will void the warranty.
6. Do not place heavy objects on the device.
7. Use only the supplied and approved chargers.
8. Unplug this device when unused for long periods of time or during
lightening storms.
9. The battery used in this device may present a risk of fire or chemical
burn if mistreated.
1. Please read this User's Manual carefully and follow all instructions.
2. To avoid any damage or malfunction of the device do not drop the
device from high places.
3. Keep device away from humidity, water and any other liquid. If the
device is exposed to water, moisture and other liquids do not operate it
to avoid any electrical shock, explosion and damage to the device or
yourself.
4. Do not place or keep this device near any heat sources, such as, direct
sunlight, radiators, stoves or other apparatus that produce heat. This may
cause an explosion, degrade the performance and/or reduce battery life.
2. To avoid any damage or malfunction of the device do not drop the
device from high places.
3. Keep device away from humidity, water and any other liquid. If the
device is exposed to water, moisture and other liquids do not operate it
to avoid any electrical shock, explosion and damage to the device or
yourself.
4. Do not place or keep this device near any heat sources, such as, direct
sunlight, radiators, stoves or other apparatus that produce heat. This may
cause an explosion, degrade the performance and/or reduce battery life.
2
1
4
1
2
3
4
5
6
6
5
3
Ear Cap
Indicator
Volume Up/Previous
Volume Down/Next
Pairing/Answer,Power/Play
Micro USB charge port
Indicator
Volume Up/Previous
Volume Down/Next
Pairing/Answer,Power/Play
Micro USB charge port
s Bluetooth Headset
FCC ID:2AAOE14BWSH1