Sure Wave Limited CQL1421-B User Manual
CQL1421-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use.
To charge the battery : Using a Micro USB cable (included), insert the jack into
the ”Charging” hole located at the back of the unit and then plug the USB connecter
into the USB port on a computer or into a compatible USB DC 5V wall charge (Not
included) to charge through a standard wall outlet.
A red light at the back of the unit will indicate the charging situation. When battery is
full, the red light will turn off automatically.
Bluetooth Speaker Operation
Turn on the unit by pushing the switch at the back to
/
Aux
position. A Blue light on
side will start blinking to indicate the speaker is in paring mode and searching for your
Bluetooth mobile device.
Open the Bluetooth function on your device and search the speaker named “
XXX
”.
After selecting this speaker, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flashing
four times every 3 seconds after pair is complete.
Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in used.
Turn off the unit when not in used.
Universal Speaker Operation
For other music devices without Bluetooth, use the attached audio input cable. Insert
the 3.5mm input jack into the “Aux-in” to enjoy music.
Turn on the unit by pushing the switch at back to
/
Aux
position and start playing
music.
Caution:
This is not a toy. Please keep away from small children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over charge the battery.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over charge the battery.