AAPPAA TECHNOLOGY LIMITED D70A1 User Manual
4
3. Quick Guide
3.1 About the Touch Screen
The screen is a capacitive touch screen; you can use five fingers to touch the screen at the same
time.
3.2 Switch On/Off
The screen is a capacitive touch screen; you can use five fingers to touch the screen at the same
time.
3.2 Switch On/Off
Switch On and Unlock: When the device is in the OFF mode, press and hold the ‘POWER’ key for
3 seconds to enter the Android start-up progress bar; it takes approx. 20 seconds to display the
system desktop. When the LCD is in locked mode, press and drag the
3 seconds to enter the Android start-up progress bar; it takes approx. 20 seconds to display the
system desktop. When the LCD is in locked mode, press and drag the
icon to the green point
and the LCD will unlock automatically, see the illustration below:
3.3 Power Save Mode and Lock Screen
Briefly press the 'POWER' key after starting up the system to go to power save and lock mode.
Briefly press the 'POWER' key or tap the touch screen and system will activate in 1 second
The primary functions of the device – e.g. playing music, movies, etc. – will not stop in the
power save mode; only the LCD is turned off and shows a black screen.
Switch OFF: When the device is in the OFF mode, press and hold the 'POWER' key for 3
seconds. The screen will display the power off interface; select the power off icon to confirm
and the system will shut down automatically.
and the system will shut down automatically.
【Note】When the battery is low, the device will sound a continuous alarm and shut off
automatically if it is not charged. If the device will not start up, check if the battery is low and try
again after the battery has been charged.
automatically if it is not charged. If the device will not start up, check if the battery is low and try
again after the battery has been charged.
3.4 Battery management and charging
3.4.1 Before using your device for the first time, charge the battery for 8-12 hours to give the
device a full charge.
3.4.2 Insert the micro port of the battery adaptor into the DC slot on the device and connect the
other side to a power socket. The battery icon on the desktop icon will show the device is charging;
please wait until the battery is fully charged before disconnecting. The icon on the desktop will
show when the battery is fully charged.
【Note】In order to keep the battery functioning in optimal condition, please note the following:
Do not charge the battery in high temperatures.
There is no need to fully discharge the battery; the device can be charged even if there is some