FUJI TECOM INC. 0002 User Manual
LNL-1 manual Fujtecom., Inc. 2014
20
7-3 “Logger Data Collection Menu”
[1] “” on the left is the “new logger mark”, which is
indicated for the new logger recognized for the first
time.
indicated for the new logger recognized for the first
time.
[2] “”on the right is the “Automatic Collection
Mark”, which is indicated when collection is
appointed. The ENTER key is used to appoint
collection and release appointment for each logger.
The DELETE key is used to perform batch selection
and release (deselect).
Mark”, which is indicated when collection is
appointed. The ENTER key is used to appoint
collection and release appointment for each logger.
The DELETE key is used to perform batch selection
and release (deselect).
When the logger is detected, a beep sound is emitted once.
When data is received from the logger in the waiting status, the latest data is displayed on the top. Data
received from the logger (logger ID, judgment result, minimum sound level, and date & time of receipt) are
displayed. Maximum 500 logger data are displayed and the right/left arrow keys are used to display the
loggers on the previous/next pages.
When data is received from the logger in the waiting status, the latest data is displayed on the top. Data
received from the logger (logger ID, judgment result, minimum sound level, and date & time of receipt) are
displayed. Maximum 500 logger data are displayed and the right/left arrow keys are used to display the
loggers on the previous/next pages.
[3]“**” is displayed when the complete logger data cannot be obtained due to communication error, etc.
If “**” is displayed, the automatic collection mark is attached/displayed and the logger data is re-obtained.
[4] When the battery requires a replacement, the battery mark and the time are displayed alternately in the
time display section. Stop use of the relevant logger promptly and replace it with new one or replace the
battery.
time display section. Stop use of the relevant logger promptly and replace it with new one or replace the
battery.
When unregistered logger is detected
If a logger not registered in the analyzer is detected, a beep is emitted once, a blip is emitted three times, and
“Unregistered Logger Handling Screen” is displayed.
If a logger not registered in the analyzer is detected, a beep is emitted once, a blip is emitted three times, and
“Unregistered Logger Handling Screen” is displayed.
Registration of logger ID is performed (or only serial number is used). Use the up/down/right/left arrow keys to
change the ID and press the ENTER key to execute registration.
change the ID and press the ENTER key to execute registration.
Caution
The ID already used cannot be registered.
If the new ID returns to the old one when the ENTER key is pressed, such new ID is the already used logger
ID.
Register a different logger ID.
If the new ID returns to the old one when the ENTER key is pressed, such new ID is the already used logger
ID.
Register a different logger ID.
If multiple loggers are detected newly, the logger detected last is displayed.
For edit of logger ID, see the “Logger ID Display Edit Screen” on Page 20.
For edit of logger ID, see the “Logger ID Display Edit Screen” on Page 20.