Shenzhen Minde Electronics Technology LTD. MS3590 User Manual
22
Options Menu
Note: Press Left Soft Key to popup this menu.
Caution:
Empty and Delete operations are not undoable. It is strongly recommended to back up
the data before empty or delete operation.
the data before empty or delete operation.
Empty/Delete Files
If the U-disk is almost full, occupied room can be released by emptying/deleting some files.
A target file is protected by system and prevented from being deleting. In this case, the file that is wanted
to be deleted should be deselected and then deleted.
A target file is protected by system and prevented from being deleting. In this case, the file that is wanted
to be deleted should be deselected and then deleted.
Format
Note 1: The format function is a quick way to empty a whole U Disk.
Note 2: Please format the U Disk once before the first time of use.
Note 2: Please format the U Disk once before the first time of use.
Caution:
1. Format operation will erase all data on the disk.
2. Format operation is not undoable. It is strongly recommended to back up the data
before format operation.
2. Format operation is not undoable. It is strongly recommended to back up the data
before format operation.
5-2-5 Data Batch
The scanner starts storing barcode data in Date Batch mode. The collected barcode data can then be
sent to a host via Bluetooth/USB. Three options are listed below.
Send Batch Data- Data transmission is triggered by this menu command. Before undertaking this
operation, make sure a communication link (Bluetooth network or USB cable) is working.
Interfaces- There are three types of communication interfaces Bluetooth, USB HID keyboard and USB
virtual COM. A Bluetooth link is needed in the first case (See System SettingBluetooth).
Data statistics- User can select to enable/disable the Data Statistics. When it is enabled, the number of
a barcode would be added to the end of the barcode. The eighth barcode is “123456789” in the
example below.
Example:
sent to a host via Bluetooth/USB. Three options are listed below.
Send Batch Data- Data transmission is triggered by this menu command. Before undertaking this
operation, make sure a communication link (Bluetooth network or USB cable) is working.
Interfaces- There are three types of communication interfaces Bluetooth, USB HID keyboard and USB
virtual COM. A Bluetooth link is needed in the first case (See System SettingBluetooth).
Data statistics- User can select to enable/disable the Data Statistics. When it is enabled, the number of
a barcode would be added to the end of the barcode. The eighth barcode is “123456789” in the
example below.
Example:
Auto Clear-The scanner will clear the stored barcode after finishing sending.