eResearchTechnology GmbH AM3G01 User Manual
Page 15/42
Peak Flow Meter AM3 - Instructions for Use for Trial xxx
Version 00.03 • Date 04NOV2013
2.4
Device Settings (Service Mode)
The Service Mode must be activated to view the following AM settings:
Study ID, date and time, serial number of the AM, ERT Study ID, Site and Subject
number, battery status, the percentage of stored measurements and answers, the
date of last data transfer and some technical settings.
Study ID, date and time, serial number of the AM, ERT Study ID, Site and Subject
number, battery status, the percentage of stored measurements and answers, the
date of last data transfer and some technical settings.
To turn the AM ON in Service Mode, press and hold the
button. While holding
the
button, press and hold the
button. Hold both buttons for
approximately 2 seconds. The following screen will appear:
After pressing
the following screen is displayed:
After pressing
the following screen is displayed:
Study ID
Date and time
XXXXXXXXXXX
Date/Time
Date/Time
25.08.09 13.05
Battery status (FULL, OK,
or NOK)
System-generated number
Serial number of AM
Serialno.: E001569
XXXXXX-XXXXXX-145123
Battery: OK
MEMORY STATUS
Measurements: 0%
Answers: 0%
AM storage capacity
ERT Study ID