Wanxin Image Corporation CPITP101 User Manual
4
Remove U-Disk
Close all applications or documents which have been opened on the U-disk. Tap
→ Settings →Storage →USB storage → Unmount this storage device. And then
you can unplug the U-disk.
☆
Don’t insert and remove the U-disk repeatedly in a short time, as this may cause
damage to the U-disk.
4
USING MICRO-SD CARD
☆
The device supports a maximum 32GB micro SD card.
Insert your card into the micro SD slot until it clicks into place. It’s OK.
Remove micro SD Card
Close all applications or documents which have been opened on the card. Tap
→ Settings → Storage →SD card → Un-mount this storage device. Press the
card lightly; it is partially ejected allowing you to pull the card out.
☆
Don’t insert and remove the U-disk repeatedly in a short time, as this may cause
damage to the card.
☆
We recommend using major brands of memory cards to avoid incompatibility.
5
GETTING STARTED
Charge the device
☆
It is not recommended to use the device while charging.
Plug the power adapter into an electrical wall outlet, and then connect to the device to fully
charge the battery before use (A full charge takes about 6 hours in the off status).
Turn the device on
Press the power button briefly.
Wi-Fi Network Setup
Since many features require a Wi-Fi connection, we recommend you set up your Wi-Fi
network now.
1. Tap
→ Settings.
2. Slide Wi-Fi switch to turn on.
The device automatically scans and lists all local Wi-Fi Network found. A lock
indicates
secure Wi-Fi networks that require input password to connect.
3. Tap the desired network which you want to connect → enter the Network
Password if applicable → tap Connect.