Springs Window Fashions LLC. SRF01 User Manual
8/25/2013
Springs Window Fashions, LLC
7549 Graber Road
Middleton, WI 53562-1096
Fax (608) 831-2184
Phone (608) 836-1011
7549 Graber Road
Middleton, WI 53562-1096
Fax (608) 831-2184
Phone (608) 836-1011
2. MODULE REQUIREMENTS
1. Operating Voltage of 1.9 – 3.6vdc
2. Software Regulation required to limit RF transmissions above 3.6vdc
3. Use Certified on-board PCB trace Antenna ONLY
3. APPLICATION INFORMATION
1. This Module contains the Following
-2.4 Ghz Front End Transceiver
-8 bit MCU Core
-15
General
Purpose
Buffered
I/O
Ports
-11 Buffered Analog Channels
-Serial Ports
-I2C, UART, SPI
2. Ports Can Source/Sink a Max of 15mA shared, 5mA/pin
3. Module Has Internal Voltage reference Measurement
4. Please Follow Module Pin Out Diagram Below
5. For Best Performance. Module should be mounted with PCB Trace
Antenna fully exposed, removed from nearby Ground potentials, and not
place in proximity to other objects.
4. LABELING REQUIREMENTS