Shenzhen Cycer Innovation Technology Co. Ltd. ARG-MS-0032 User Manual

Thank you for purchasing RG-MS-0032 of products. The series of 2.4GHz Wireless Optical  

Mouse include the wireless mouse, the super mini nano receiver, and this user manual;  

please check the contents of your package. 

 

1. 2.4G wireless mouse x1 

2. USB receiver x1 

3. User Manual x1 

Technology Parameter    

1. Rating Working Voltage: 3V   

2. Rating Working Current: 13mA   

3. Wireless Frequency: 2402~2480 MHz   

4. Operating Range: 10M   

5. Resolution: 1000 DPI 

 

1) Push the botton on the rear of the mouse to open the battery cover.    

2) Insert two AAA batteries into the compartment. Make sure to comply with the polarity marking  

3) Close the battery cover back onto the mouse again until you hear it click into place.   

 

1) Press once to turn on the power.    

2) Press again and wait for 3 seconds to turn off the power if not use for a long time.   

 

1) The magnetic pulling type nano receiver is attached on the mouse bottom.  

2) Snap it out with your thumb and index fingers.  

3) The power of the mouse shuts down once the receiver is attached to the mouse.   

 

1) Turn on the power by pressing the power button.  

2) Insert receiver into USB port in your notebook or PC.    

3) If you use desk PC, there is a little far between the case and your working surface, suggest you 

use  an extended USB cable to connect your case and the receiver, so you can place the receiver o

n your working surface conveniently.    

4) After computer host identifying the receiver automatically, your wireless mouse has installed tot

ally,  you can enjoy surfing free from cable.   

 

This product is equipped with auto-syncing function. The Super Mini Nano Receiver and the Wire

less Mouse will sync automatically once are activated. Should there be any problem while auto-sy

ncing, please follow the steps to sync manually.    

The manual syncing steps have to be carried out within 10 seconds if a successful connection is to 

be established between the mouse and the RF receiver. Ensure that the mouse is no further than