Peerless CMR410 Leaflet

3.25

83

10 lbs

10 lbs

(4.5 kg)

(4.5 kg)

.5 lbs

.6 lbs

(.23 kg)

(.27 kg)

1 lb

1 lb

(.5 kg)

(.5 kg)

Peerless Industries, Inc.
3215 W. North Ave.

phone: (708) 865-8870

Melrose Park, IL 60160

fax: (708) 865-2941

The Camera Mount shall be a Peerless model CMR 405 or CMR 410 and shall be located
where indicated on the plans. It shall be constructed of nylon to eliminate ground loop
problems. It shall feature a ball and socket design for a wide range of tilt and swivel. The
mounting hole pattern shall allow for attachment to a wall or ceiling, or direct attachment to
an electrical outlet box. Assembly and installation shall be done according to instructions
provided by the manufacturer.

inch

m m

housing

.28 dia.

.15 dia.

2.125

54

3

76

(mounting plate)

Camera Mount may be attached to wall or ceiling via the four large
mounting holes in the mounting plate, or directly to a standard electrical
outlet box via two small mounting holes. Hardware for attaching
Camera Mount to mounting surface is not included.

Angle of ball stud can be adjusted by loosening tension screw. Ball stud
can be removed for attachment to camera, then reattached and locked
into position at the desired angle by tightening tension screw. Ball stud
removal is not required for camera attachment.

housing

tension screw

.75 dia. cable/wire
access hole

.75 dia. cable/
wire access hole

ball stud

mounting plate

Patent Pending

© 2007 Peerless Industries, Inc.  All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.

4.125 in

6.5 in

(105 mm)

(165 mm)

5.0 in

7.375 in

(127 mm)

(187 mm)

4.75

121